P1202 – OBD-II DTC

OBD-II DTC P1202 – Key Off Voltage Low

DTC P1202 meaning

DTC P1202 refers to a diagnostic trouble code indicating a “Key Off Voltage Low” condition. This code is triggered when the Engine Control Module (ECM) detects a voltage level that is lower than expected when the ignition key is turned off. It typically relates to issues with the vehicle’s electrical system, particularly in the fuel management system.

DTC P1202 symptoms

Common symptoms associated with DTC P1202 may include:

• Check Engine Light illuminated
• Difficulty starting the engine
• Engine stalling or misfiring
• Reduced engine performance
• Inconsistent fuel delivery

DTC P1202 causes

Several factors can lead to the triggering of DTC P1202, including:

• Faulty fuel pump or fuel pump relay
• Weak or dead battery
• Corroded or loose electrical connections
• Defective ECM or wiring issues
• Issues with the ignition switch

DTC P1202 seriousness

The seriousness of DTC P1202 can vary depending on the underlying cause. While it may not immediately affect vehicle safety, it can lead to performance issues and potential engine damage if not addressed. It is advisable to diagnose and repair the issue promptly to avoid further complications.

How to diagnose DTC P1202

To diagnose DTC P1202, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1202 code.
2. Inspect the vehicle’s battery and charging system for any issues.
3. Check all related wiring and connectors for corrosion or damage.
4. Test the fuel pump and its relay for proper operation.
5. Examine the ignition switch for functionality.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P1202 step-by-step instructions

To fix DTC P1202, follow these step-by-step instructions:

1. Disconnect the negative battery terminal to ensure safety.
2. Inspect and clean all electrical connections related to the fuel system and ECM.
3. Test and replace the battery if it is weak or dead.
4. Check the fuel pump and relay replace them if they are faulty.
5. Examine the ignition switch and replace it if necessary.
6. Reconnect the battery terminal and clear the DTC using an OBD-II scanner.
7. Perform a test drive to ensure the issue is resolved and the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.