P1206 – OBD-II DTC

OBD-II DTC P1206 – Injector Circuit Open / Shorted – Cylinder #1

DTC P1206 meaning

DTC P1206 refers to a diagnostic trouble code indicating an issue with the injector circuit for cylinder #1. This code is triggered when the Engine Control Module (ECM) detects an open or shorted condition in the injector circuit, which can lead to improper fuel delivery to the engine cylinder. The injector may not be functioning correctly, resulting in performance issues.

DTC P1206 symptoms

Common symptoms associated with DTC P1206 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated

DTC P1206 causes

Several factors can lead to the triggering of DTC P1206, including:

• Faulty fuel injector for cylinder #1
• Open or shorted wiring in the injector circuit
• Defective ECM
• Corroded or loose electrical connectors
• Faulty fuel injector driver circuit

DTC P1206 seriousness

The seriousness of DTC P1206 can vary, but it is generally considered a moderate to high priority issue. If left unaddressed, it can lead to:

• Severe engine performance issues
• Increased emissions
• Potential engine damage

It is advisable to diagnose and repair the issue promptly to avoid further complications.

How to diagnose DTC P1206

To diagnose DTC P1206, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1206 code.
2. Inspect the wiring and connectors for cylinder #1 injector for any visible damage or corrosion.
3. Check the resistance of the injector using a multimeter to ensure it is within specifications.
4. Test the injector circuit for continuity and shorts to ground.
5. Examine the ECM for any faults or issues that may affect the injector operation.

How to fix DTC P1206 step-by-step instructions

To fix DTC P1206, follow these step-by-step instructions:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the injector circuit.
3. If the injector is faulty, replace it with a new one.
4. Test the injector circuit for proper voltage and ground signals.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Start the engine and monitor for any reoccurrence of the P1206 code.

How to erase DTC P1206

To erase DTC P1206, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.