P1211 – OBD-II DTC

OBD-II DTC P1211 – Injector Circuit Open / Shorted – Cylinder #4

DTC P1211 meaning

DTC P1211 indicates an issue with the injector circuit for cylinder #4. This code is triggered when the Engine Control Module (ECM) detects an open or shorted condition in the injector circuit, which can prevent the injector from functioning properly. The injector is responsible for delivering fuel to the engine, and any malfunction can lead to performance issues.

DTC P1211 symptoms

Common symptoms associated with DTC P1211 may include:

• Engine misfire or rough idle
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated
• Difficulty starting the engine

DTC P1211 causes

Several factors can lead to the triggering of DTC P1211, including:

• Open circuit in the injector wiring
• Short circuit in the injector wiring
• Faulty fuel injector for cylinder #4
• Defective ECM
• Corroded or loose electrical connectors

DTC P1211 seriousness

DTC P1211 is considered a serious issue as it directly affects the engine’s fuel delivery system. If left unaddressed, it can lead to:

• Severe engine performance problems
• Increased emissions
• Potential engine damage
• Failure to pass emissions tests

How to diagnose DTC P1211

To diagnose DTC P1211, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1211 code.
2. Inspect the wiring and connectors for cylinder #4 injector for any visible damage or corrosion.
3. Check the resistance of the injector using a multimeter to ensure it is within specifications.
4. Test the voltage supply to the injector while the engine is running.
5. Perform a continuity test on the injector circuit to check for opens or shorts.
6. If necessary, replace the injector or repair the wiring as indicated by the tests.

How to fix DTC P1211 step-by-step instructions

To fix DTC P1211, follow these step-by-step instructions:

1. Disconnect the negative battery terminal to ensure safety.
2. Inspect the wiring and connectors for cylinder #4 injector for any signs of damage or corrosion.
3. Repair or replace any damaged wiring or connectors.
4. Test the fuel injector for cylinder #4 using a multimeter to check for proper resistance.
5. If the injector is faulty, replace it with a new one.
6. Reconnect all connectors and wiring securely.
7. Reconnect the negative battery terminal.
8. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P1211

To erase DTC P1211, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.