P1212 – OBD-II DTC

OBD-II DTC P1212 – Injector Circuit Open / Shorted – Cylinder #5

DTC P1212 meaning

DTC P1212 indicates an issue with the injector circuit for cylinder #5. This code is triggered when the Engine Control Module (ECM) detects an open or shorted condition in the injector circuit, which can prevent the injector from functioning properly. The injector is responsible for delivering fuel to the engine, and any malfunction can lead to performance issues.

DTC P1212 symptoms

Common symptoms associated with DTC P1212 may include:

• Engine misfire or rough idle
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated
• Difficulty starting the engine

DTC P1212 causes

Several factors can lead to the triggering of DTC P1212, including:

• Faulty fuel injector for cylinder #5
• Open or shorted wiring in the injector circuit
• Defective ECM or poor ECM connections
• Corroded or damaged connectors
• Faulty fuel injector driver circuit

DTC P1212 seriousness

The seriousness of DTC P1212 can vary based on the underlying issue. If left unaddressed, it can lead to:

• Severe engine performance issues
• Increased emissions
• Potential engine damage due to misfires

It is advisable to diagnose and repair the issue promptly to avoid further complications.

How to diagnose DTC P1212

To diagnose DTC P1212, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1212 code.
2. Inspect the wiring and connectors for cylinder #5 injector for any visible damage or corrosion.
3. Check the resistance of the injector using a multimeter to ensure it is within specifications.
4. Test the injector circuit for continuity and shorts to ground.
5. Examine the ECM and its connections for any faults.

How to fix DTC P1212 step-by-step instructions

To fix DTC P1212, follow these steps:

1. Repair or replace any damaged wiring or connectors in the injector circuit.
2. If the injector is faulty, replace it with a new one.
3. Ensure all connections are secure and free from corrosion.
4. Test the injector driver circuit in the ECM for proper operation.
5. Clear the DTC using an OBD-II scanner and perform a test drive to verify the repair.

How to erase DTC P1212

To erase DTC P1212, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.