P1214 – OBD-II DTC

OBD-II DTC P1214 – Injector Control Pressure System Fault

DTC P1214 meaning

DTC P1214 refers to an Injector Control Pressure System Fault. This code indicates that the engine control module (ECM) has detected an issue with the pressure of the fuel injectors, which can affect the engine’s performance and efficiency. The injector control pressure is crucial for maintaining the correct fuel delivery to the engine, and any faults in this system can lead to various operational problems.

DTC P1214 symptoms

Common symptoms associated with DTC P1214 may include:

• Engine misfires or rough idling
• Decreased engine performance
• Increased fuel consumption
• Difficulty starting the engine
• Check Engine Light (CEL) illuminated

DTC P1214 causes

Several factors can contribute to the occurrence of DTC P1214, including:

• Faulty fuel pressure regulator
• Clogged fuel filter
• Defective fuel pump
• Leaking fuel injectors
• Wiring issues or poor connections in the injector control circuit
• Faulty engine control module (ECM)

DTC P1214 seriousness

DTC P1214 is considered a serious issue as it can lead to significant engine performance problems. If left unaddressed, it may result in:

• Increased emissions
• Potential engine damage
• Complete engine failure in severe cases

It is advisable to diagnose and repair this fault promptly to ensure optimal engine operation and prevent further complications.

How to diagnose DTC P1214

To diagnose DTC P1214, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1214 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the fuel system components, including the fuel pump, fuel filter, and fuel pressure regulator.
4. Examine the wiring and connectors related to the injector control circuit for damage or corrosion.
5. Test the fuel pressure using a fuel pressure gauge to ensure it meets manufacturer specifications.
6. Perform a visual inspection of the fuel injectors for leaks or blockages.
7. Check the ECM for proper operation and any software updates that may be required.

How to fix DTC P1214 step-by-step instructions

To fix DTC P1214, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and replace any damaged wiring or connectors in the injector control circuit.
3. Replace the fuel filter if it is clogged or dirty.
4. Test and replace the fuel pump if it is not delivering the correct pressure.
5. Replace the fuel pressure regulator if it is faulty.
6. Repair or replace leaking fuel injectors as necessary.
7. Recheck the fuel pressure to ensure it is within specifications.
8. Reconnect the battery and start the engine to verify that the issue is resolved.

How to erase DTC P1214

To erase DTC P1214 from the vehicle’s computer, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.