P1216 – OBD-II DTC

OBD-II DTC P1216 – Injector Control Pressure Sensor Above / Below Desired

DTC P1216 meaning

DTC P1216 refers to a diagnostic trouble code that indicates an issue with the injector control pressure sensor. Specifically, it signifies that the pressure reading from the sensor is either above or below the desired level set by the engine control module (ECM). This can affect the fuel injection system’s performance and overall engine efficiency.

DTC P1216 symptoms

Common symptoms associated with DTC P1216 may include:

• Engine misfires or rough idling
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated
• Difficulty starting the engine

DTC P1216 causes

Several factors can lead to the triggering of DTC P1216, including:

• Faulty injector control pressure sensor
• Wiring issues or poor connections in the sensor circuit
• Faulty fuel pump or fuel pressure regulator
• Vacuum leaks affecting the fuel system
• ECM software issues or malfunctions

DTC P1216 seriousness

DTC P1216 can be considered serious as it may lead to significant engine performance issues. If left unaddressed, it can result in:

• Increased emissions
• Potential engine damage
• Failure to pass emissions tests
• Reduced fuel efficiency

How to diagnose DTC P1216

To diagnose DTC P1216, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1216 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the injector control pressure sensor and its wiring for damage or corrosion.
4. Test the sensor’s voltage and resistance according to manufacturer specifications.
5. Check the fuel pressure to ensure it is within the required range.
6. Examine the fuel pump and regulator for proper operation.
7. Look for any vacuum leaks that could affect pressure readings.

How to fix DTC P1216 step-by-step instructions

To fix DTC P1216, follow these steps:

1. Clear the trouble code using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the injector control pressure sensor.
3. If the sensor is faulty, replace it with a new one.
4. Check and replace the fuel pump or fuel pressure regulator if they are not functioning correctly.
5. Fix any vacuum leaks found during the diagnosis.
6. Recheck the system by starting the engine and monitoring for any new codes.

How to erase DTC P1216

To erase DTC P1216, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.