P1219 – OBD-II DTC

OBD-II DTC P1219 – Pedal Position Sensor B Circuit Intermittent

DTC P1219 meaning

DTC P1219 refers to an issue with the Pedal Position Sensor B Circuit, indicating that there is an intermittent fault in the sensor’s signal. The Pedal Position Sensor is crucial for determining the position of the accelerator pedal, which directly affects engine performance and throttle response. When the sensor fails or sends erratic signals, it can lead to poor engine performance and drivability issues.

DTC P1219 symptoms

Common symptoms associated with DTC P1219 may include:

• Check Engine Light illuminated
• Unresponsive or erratic throttle response
• Engine stalling or hesitation during acceleration
• Reduced engine power or limp mode activation
• Increased fuel consumption

DTC P1219 causes

Several factors can contribute to the occurrence of DTC P1219, including:

• Faulty Pedal Position Sensor B
• Wiring issues such as shorts, opens, or corrosion in the sensor circuit
• Connector problems, including loose or damaged connectors
• Faulty Engine Control Module (ECM) or software issues
• Intermittent electrical connections due to vibration or temperature changes

DTC P1219 seriousness

DTC P1219 can be considered serious as it affects the vehicle’s throttle response and overall engine performance. If left unaddressed, it may lead to further complications, including potential safety hazards due to reduced power or stalling. It is advisable to diagnose and repair the issue promptly to ensure safe and reliable vehicle operation.

How to diagnose DTC P1219

To diagnose DTC P1219, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P1219.
2. Inspect the Pedal Position Sensor B and its wiring for visible damage or corrosion.
3. Check the connectors for secure connections and signs of wear.
4. Test the voltage and ground signals at the sensor using a multimeter.
5. Compare the readings with manufacturer specifications to determine if the sensor is functioning correctly.
6. Clear the DTC and perform a road test to see if the code reappears.

How to fix DTC P1219 step-by-step instructions

To fix DTC P1219, follow these steps:

1. Inspect and repair any damaged wiring or connectors related to the Pedal Position Sensor B.
2. If the sensor is faulty, replace it with a new one according to manufacturer specifications.
3. Ensure all connections are secure and free from corrosion.
4. Recheck the voltage and ground signals at the sensor after repairs.
5. Clear the DTC using an OBD-II scanner.
6. Perform a road test to confirm that the issue is resolved and the DTC does not reappear.

How to erase DTC P1219

To erase DTC P1219, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the DTC does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.