P1220 – OBD-II DTC

OBD-II DTC P1220 – Pedal Position Sensor C Circuit Low Input

DTC P1220 meaning

DTC P1220 refers to a diagnostic trouble code indicating a low input signal from the Pedal Position Sensor C circuit. This sensor is crucial for monitoring the position of the accelerator pedal, which helps the engine control module (ECM) determine the appropriate amount of fuel and air mixture for optimal engine performance. A low input signal suggests that the sensor is not providing the expected voltage or signal to the ECM, potentially leading to performance issues.

DTC P1220 symptoms

Common symptoms associated with DTC P1220 may include:

• Illuminated check engine light
• Reduced engine power or acceleration
• Unresponsive throttle
• Erratic engine behavior
• Difficulty in maintaining speed

DTC P1220 causes

Several factors can lead to the occurrence of DTC P1220, including:

• Faulty Pedal Position Sensor C
• Wiring issues such as shorts or open circuits
• Corroded or loose electrical connectors
• Faulty engine control module (ECM)
• Mechanical issues with the accelerator pedal assembly

DTC P1220 seriousness

DTC P1220 can be considered serious as it may affect the vehicle’s drivability and performance. If left unaddressed, it can lead to further complications, including:

• Increased fuel consumption
• Potential engine damage due to improper fuel-air mixture
• Safety risks due to reduced throttle response

How to diagnose DTC P1220

To diagnose DTC P1220, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1220 code.
2. Inspect the Pedal Position Sensor C and its wiring for visible damage or corrosion.
3. Check the electrical connectors for secure connections.
4. Test the voltage output of the Pedal Position Sensor C using a multimeter.
5. Compare the readings with manufacturer specifications.
6. Inspect the ECM for any fault codes or issues.

How to fix DTC P1220 step-by-step instructions

To fix DTC P1220, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. Repair or replace any damaged wiring or connectors related to the Pedal Position Sensor C.
3. If the sensor is faulty, replace the Pedal Position Sensor C with a new one.
4. Ensure all connections are secure and free of corrosion.
5. Reconnect the battery if it was disconnected during repairs.
6. Start the vehicle and check for any reoccurrence of the DTC.

How to erase DTC P1220

To erase DTC P1220, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.