P1224 – OBD-II DTC

OBD-II DTC P1224 – CID Low

DTC P1224 meaning

DTC P1224 refers to a diagnostic trouble code indicating a “CID Low” condition. CID stands for “Current Input Device,” which is typically associated with the throttle position sensor or the electronic throttle control system. This code suggests that the input signal from the throttle position sensor is lower than expected, which can affect engine performance and drivability.

DTC P1224 symptoms

Common symptoms associated with DTC P1224 may include:

• Reduced engine power
• Unresponsive throttle
• Check Engine Light illuminated
• Erratic engine behavior
• Difficulty accelerating

DTC P1224 causes

Several factors can lead to the occurrence of DTC P1224, including:

• Faulty throttle position sensor
• Wiring issues or poor connections in the throttle control circuit
• Malfunctioning electronic throttle control module
• Vacuum leaks affecting engine performance
• Software issues in the engine control unit (ECU)

DTC P1224 seriousness

DTC P1224 is considered a moderate to serious issue. While it may not cause immediate engine failure, it can lead to significant drivability problems and reduced engine performance. Ignoring this code can result in further damage to the throttle control system or other engine components.

How to diagnose DTC P1224

To diagnose DTC P1224, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1224 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the throttle position sensor and its wiring for damage or corrosion.
4. Test the throttle position sensor using a multimeter to ensure it operates within specifications.
5. Examine the electronic throttle control module for faults.
6. Check for vacuum leaks in the intake system.
7. Review the vehicle’s service history for any recent repairs that may relate to the issue.

How to fix DTC P1224 step-by-step instructions

To fix DTC P1224, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the throttle position sensor.
3. Replace the throttle position sensor if it is found to be faulty.
4. Check and repair any vacuum leaks in the intake system.
5. Reprogram or replace the electronic throttle control module if necessary.
6. Test drive the vehicle to ensure the issue is resolved and the check engine light does not reappear.

How to erase DTC P1224

To erase DTC P1224, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.