P1228 – OBD-II DTC

OBD-II DTC P1228 – Pedal Demand Sensor B Circuit High Input

DTC P1228 meaning

DTC P1228 refers to a diagnostic trouble code indicating a high input signal from the Pedal Demand Sensor B circuit. This sensor is responsible for relaying the driver’s accelerator pedal position to the engine control module (ECM). A high input signal suggests that the sensor is detecting an unusually high voltage, which may lead to improper engine performance or response.

DTC P1228 symptoms

Common symptoms associated with DTC P1228 may include:

• Illuminated check engine light
• Unresponsive or erratic throttle response
• Reduced engine power or performance
• Increased fuel consumption
• Potential stalling or hesitation during acceleration

DTC P1228 causes

Several factors can trigger DTC P1228, including:

• Faulty Pedal Demand Sensor B
• Wiring issues, such as short circuits or open circuits in the sensor circuit
• Corrosion or poor connections at the sensor or ECM
• Faulty engine control module (ECM)
• Mechanical issues affecting the accelerator pedal assembly

DTC P1228 seriousness

DTC P1228 is considered a serious issue as it can affect vehicle performance and safety. The high input signal can lead to unintended acceleration or reduced power, which may pose risks while driving. It is advisable to address this code promptly to ensure safe operation of the vehicle.

How to diagnose DTC P1228

To diagnose DTC P1228, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1228 code.
2. Inspect the Pedal Demand Sensor B and its wiring for visible damage or corrosion.
3. Check the sensor’s voltage output using a multimeter while operating the accelerator pedal.
4. Examine the ECM for any related trouble codes that may provide additional context.
5. Perform a continuity test on the wiring between the sensor and the ECM.

How to fix DTC P1228 step-by-step instructions

To fix DTC P1228, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the Pedal Demand Sensor B.
3. If the sensor is faulty, replace it with a new one.
4. Reconnect all connectors and ensure they are secure.
5. Test drive the vehicle to see if the code reappears.
6. If the code returns, consider checking the ECM for faults or further diagnosing the system.

How to erase DTC P1228

To erase DTC P1228, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the vehicle to ensure the check engine light remains off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.