P1240 – OBD-II DTC

OBD-II DTC P1240 – Fuel Pump Control Out Of Range

DTC P1240 meaning

DTC P1240 refers to a diagnostic trouble code indicating that the fuel pump control is out of range. This code is triggered when the Engine Control Module (ECM) detects that the fuel pump is not operating within the expected parameters. The fuel pump is crucial for delivering fuel from the tank to the engine, and any issues can lead to performance problems or engine failure.

DTC P1240 symptoms

Common symptoms associated with DTC P1240 may include:

• Engine stalling or misfiring
• Difficulty starting the engine
• Reduced engine power or performance
• Increased fuel consumption
• Check Engine Light illuminated

DTC P1240 causes

Several factors can lead to the triggering of DTC P1240, including:

• Faulty fuel pump
• Wiring issues or poor connections in the fuel pump circuit
• Defective fuel pump relay
• Malfunctioning fuel pressure regulator
• ECM software issues or failure

DTC P1240 seriousness

DTC P1240 is considered a serious issue as it can affect the vehicle’s ability to operate efficiently. If left unaddressed, it may lead to:

• Engine performance problems
• Increased risk of engine stalling
• Potential damage to the engine or fuel system

How to diagnose DTC P1240

To diagnose DTC P1240, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1240 code.
2. Inspect the fuel pump and its wiring for any visible damage or loose connections.
3. Check the fuel pump relay for proper operation.
4. Test the fuel pressure to ensure it meets manufacturer specifications.
5. Examine the ECM for any software updates or faults.

How to fix DTC P1240 step-by-step instructions

To fix DTC P1240, follow these step-by-step instructions:

1. Disconnect the battery to ensure safety while working on the vehicle.
2. Inspect and repair any damaged wiring or connections in the fuel pump circuit.
3. Replace the fuel pump relay if it is found to be faulty.
4. Replace the fuel pump if it is not functioning correctly.
5. Check and replace the fuel pressure regulator if necessary.
6. Reconnect the battery and clear the DTC using an OBD-II scanner.
7. Test drive the vehicle to ensure the issue is resolved and the code does not return.

How to erase DTC P1240

To erase DTC P1240, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.