P1245 – OBD-II DTC

OBD-II DTC P1245 – Sensor Power Supply Malfunction

DTC P1245 meaning

DTC P1245 refers to a “Sensor Power Supply Malfunction.” This code indicates that there is an issue with the power supply to a specific sensor in the vehicle’s engine management system. The affected sensor is typically related to the fuel system or the turbocharger system, depending on the vehicle make and model. When the power supply to this sensor is disrupted, it can lead to incorrect readings and affect the overall performance of the engine.

DTC P1245 symptoms

Common symptoms associated with DTC P1245 may include:

• Check Engine Light (CEL) illuminated
• Decreased engine performance
• Increased fuel consumption
• Rough idling or stalling
• Turbocharger not functioning properly (if applicable)

DTC P1245 causes

The causes of DTC P1245 can vary, but typical reasons include:

• Faulty sensor or wiring
• Corroded or loose electrical connections
• Blown fuse related to the sensor power supply
• Issues with the Engine Control Module (ECM)
• Short circuit or open circuit in the wiring harness

DTC P1245 seriousness

DTC P1245 is considered a moderate to serious issue. While it may not cause immediate catastrophic failure, it can lead to poor engine performance, increased emissions, and potential long-term damage if not addressed. It is advisable to diagnose and repair the issue promptly to maintain optimal vehicle performance and efficiency.

How to diagnose DTC P1245

To diagnose DTC P1245, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1245 code.
2. Inspect the related sensor and wiring for visible damage or corrosion.
3. Check the power supply to the sensor using a multimeter.
4. Test the sensor’s functionality by comparing its readings to manufacturer specifications.
5. Examine the ECM for any fault codes or issues.

How to fix DTC P1245 step-by-step instructions

To fix DTC P1245, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the sensor.
3. Replace any blown fuses that may affect the sensor power supply.
4. Replace the faulty sensor if it is not functioning correctly.
5. Recheck the power supply to ensure it is stable and within specifications.
6. Reconnect everything and perform a test drive to see if the code reappears.

How to erase DTC P1245

To erase DTC P1245, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.