P1253 – OBD-II DTC

OBD-II DTC P1253 – Turbo Boost Pressure Not Detected

DTC P1253 meaning

DTC P1253 indicates that the Engine Control Module (ECM) has detected a problem with the turbo boost pressure system. Specifically, it means that the turbo boost pressure is not being detected as expected. This can lead to reduced engine performance and efficiency, as the turbocharger is not functioning properly.

DTC P1253 symptoms

Common symptoms associated with DTC P1253 may include:

• Reduced engine power and acceleration
• Increased fuel consumption
• Check Engine Light (CEL) illuminated
• Turbocharger not spooling or producing boost
• Unusual engine noises

DTC P1253 causes

Several factors can contribute to the occurrence of DTC P1253, including:

• Faulty turbocharger or wastegate
• Vacuum leaks in the intake system
• Faulty boost pressure sensor
• Wiring issues or poor connections in the boost control circuit
• ECM software issues or failures

DTC P1253 seriousness

DTC P1253 is considered a moderate to serious issue. While it may not cause immediate engine failure, it can lead to significant performance issues and increased emissions. If left unaddressed, it may result in further damage to the turbocharger or other engine components.

How to diagnose DTC P1253

To diagnose DTC P1253, follow these steps:

1. Use an OBD-II scanner to confirm the DTC and check for any additional codes.
2. Inspect the turbocharger and wastegate for physical damage or signs of wear.
3. Check the boost pressure sensor and its wiring for faults.
4. Examine the intake system for vacuum leaks.
5. Test the turbocharger operation by monitoring boost pressure during engine operation.

How to fix DTC P1253 step-by-step instructions

To fix DTC P1253, follow these steps:

1. Address any identified vacuum leaks in the intake system.
2. Replace a faulty boost pressure sensor if necessary.
3. Repair or replace damaged wiring or connectors in the boost control circuit.
4. Inspect and, if needed, replace the turbocharger or wastegate.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P1253

To erase DTC P1253, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to verify that the DTC does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.