OBD-II DTC P1257 – Pedal Correlation PDS1 and LPDS High
DTC P1257 meaning
DTC P1257 refers to a diagnostic trouble code that indicates a problem with the correlation between the accelerator pedal position sensor (PDS1) and the low pedal position sensor (LPDS). This code suggests that the signals from these sensors are not aligning as expected, which can affect the vehicle’s throttle response and overall performance.
DTC P1257 symptoms
Common symptoms associated with DTC P1257 may include:
- Illuminated check engine light
- Unresponsive or erratic throttle behavior
- Reduced engine power or performance
- Difficulty in accelerating
- Potential stalling or hesitation during driving
DTC P1257 causes
Several factors can lead to the triggering of DTC P1257, including:
- Faulty accelerator pedal position sensor
- Malfunctioning low pedal position sensor
- Wiring issues or poor connections between sensors
- Faulty engine control module (ECM)
- Calibration issues within the throttle control system
DTC P1257 seriousness
DTC P1257 can be considered serious as it directly impacts the vehicle’s throttle response and overall drivability. If left unaddressed, it may lead to further complications, including reduced engine performance and potential safety hazards while driving.
How to diagnose DTC P1257
To diagnose DTC P1257, follow these steps:
- Use an OBD-II scanner to confirm the presence of the code.
- Inspect the accelerator pedal position sensor and low pedal position sensor for physical damage.
- Check the wiring and connectors for any signs of wear or corrosion.
- Test the sensors’ voltage and resistance using a multimeter.
- Review the vehicle’s service history for any previous related repairs.
- Clear the code and perform a road test to see if the code reappears.
How to fix DTC P1257 step-by-step instructions
To fix DTC P1257, follow these step-by-step instructions:
- Gather necessary tools: OBD-II scanner, multimeter, and basic hand tools.
- Inspect the accelerator pedal position sensor and low pedal position sensor for damage.
- Check the wiring and connectors for continuity and secure connections.
- If any sensor is faulty, replace it with a new one.
- Recheck the wiring and connections after replacement.
- Clear the DTC using the OBD-II scanner.
- Perform a road test to ensure the issue is resolved and the code does not return.
How to erase DTC P1257
To erase DTC P1257, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn on the ignition without starting the engine.
- Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
- Confirm the action to clear the trouble codes.
- Disconnect the scanner and start the vehicle to verify that the check engine light is off.
Recommended tools for OBD-II diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.