P1259 – OBD-II DTC

OBD-II DTC P1259 – Pedal Correlation PDS2 and LPDS High

DTC P1259 meaning

DTC P1259 refers to a diagnostic trouble code that indicates a problem with the correlation between the pedal position sensors (PDS2) and the low pedal position sensor (LPDS). This code is triggered when the Engine Control Module (ECM) detects a discrepancy in the signals from these sensors, which are crucial for proper throttle control and engine performance.

DTC P1259 symptoms

Common symptoms associated with DTC P1259 may include:

• Illumination of the Check Engine Light (CEL)
• Unresponsive or erratic throttle behavior
• Reduced engine power or performance
• Difficulty in accelerating
• Potential stalling of the engine

DTC P1259 causes

Several factors can lead to the triggering of DTC P1259, including:

• Faulty pedal position sensors (PDS2 or LPDS)
• Wiring issues or poor connections in the sensor circuit
• Faulty Engine Control Module (ECM)
• Mechanical issues with the throttle body
• Calibration issues in the throttle control system

DTC P1259 seriousness

DTC P1259 can be considered serious as it affects the vehicle’s throttle response and overall engine performance. If left unaddressed, it may lead to further complications, including potential safety hazards due to reduced power or stalling. It is advisable to diagnose and repair the issue promptly to ensure safe vehicle operation.

How to diagnose DTC P1259

To diagnose DTC P1259, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P1259.
2. Inspect the pedal position sensors for any visible damage or wear.
3. Check the wiring and connectors for corrosion, fraying, or loose connections.
4. Test the voltage and signal output from the PDS2 and LPDS using a multimeter.
5. Compare the readings to the manufacturer’s specifications.
6. Check for any additional trouble codes that may provide further insight.
7. Perform a visual inspection of the throttle body and related components.

How to fix DTC P1259 step-by-step instructions

To fix DTC P1259, follow these steps:

1. Address any wiring or connection issues found during diagnosis.
2. If the pedal position sensors are faulty, replace them with new ones.
3. Ensure that the throttle body is clean and functioning properly.
4. Recalibrate the throttle control system if necessary, following manufacturer guidelines.
5. Clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved and the Check Engine Light does not reappear.

How to erase DTC P1259

To erase DTC P1259, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.