P1262 – OBD-II DTC

OBD-II DTC P1262 – Pedal Correlation PDS2 and HPDS

DTC P1262 meaning

DTC P1262 refers to a diagnostic trouble code that indicates a problem with the correlation between the pedal position sensors (PDS2) and the high pedal position sensor (HPDS). This code is typically associated with vehicles equipped with electronic throttle control systems. The code suggests that the readings from these sensors do not match the expected values, which can affect engine performance and throttle response.

DTC P1262 symptoms

Common symptoms associated with DTC P1262 may include:

• Illumination of the check engine light
• Unresponsive or erratic throttle behavior
• Reduced engine power or performance
• Difficulty in accelerating
• Potential stalling or hesitation during driving

DTC P1262 causes

Several factors can lead to the triggering of DTC P1262, including:

• Faulty pedal position sensors (PDS2 or HPDS)
• Wiring issues or poor connections in the sensor circuit
• Faulty engine control module (ECM)
• Calibration issues within the throttle control system
• Mechanical issues affecting the throttle body or linkage

DTC P1262 seriousness

DTC P1262 is considered a serious issue as it can lead to compromised throttle control, which may result in unsafe driving conditions. The vehicle may enter a limp mode to protect the engine, limiting power and performance. It is advisable to address this code promptly to ensure safe operation of the vehicle.

How to diagnose DTC P1262

To diagnose DTC P1262, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1262 code.
2. Inspect the pedal position sensors and their wiring for any visible damage or disconnections.
3. Check the voltage and ground signals at the sensors using a multimeter.
4. Compare the readings from the PDS2 and HPDS to see if they are within the specified range.
5. Perform a thorough inspection of the throttle body and related components for any mechanical issues.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P1262 step-by-step instructions

To fix DTC P1262, follow these steps:

1. Identify and replace any faulty pedal position sensors (PDS2 or HPDS).
2. Repair or replace any damaged wiring or connectors in the sensor circuit.
3. Recalibrate the throttle control system if necessary, following manufacturer specifications.
4. Inspect and clean the throttle body to ensure proper operation.
5. Reconnect all components and ensure they are secure.
6. Clear the DTC using an OBD-II scanner and perform a test drive to verify the fix.

How to erase DTC P1262

To erase DTC P1262, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the diagnostic menu on the scanner and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.