P1263 – OBD-II DTC

OBD-II DTC P1263 – Pedal Correlation PDS1 and PDS2

DTC P1263 meaning

DTC P1263 refers to a diagnostic trouble code that indicates a problem with the correlation between the accelerator pedal position sensor (PDS1) and the accelerator pedal position sensor (PDS2). These sensors are responsible for monitoring the position of the accelerator pedal and sending this information to the engine control module (ECM). When the signals from these two sensors do not match or are out of the expected range, the ECM triggers this code to alert the technician of a potential issue.

DTC P1263 symptoms

Common symptoms associated with DTC P1263 may include:

• Illuminated check engine light
• Unresponsive or erratic acceleration
• Reduced engine power or limp mode
• Increased fuel consumption
• Difficulty in maintaining speed

DTC P1263 causes

Several factors can lead to the triggering of DTC P1263, including:

• Faulty accelerator pedal position sensors (PDS1 or PDS2)
• Wiring issues or poor connections in the sensor circuit
• Faulty engine control module (ECM)
• Mechanical issues with the accelerator pedal assembly
• Calibration issues or software glitches in the ECM

DTC P1263 seriousness

DTC P1263 can be considered a moderate to serious issue. While it may not cause immediate engine failure, it can lead to reduced engine performance and drivability issues. If left unaddressed, it may result in further damage to the engine or related components, and it can pose safety risks due to unresponsive acceleration.

How to diagnose DTC P1263

To diagnose DTC P1263, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1263 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the accelerator pedal position sensors (PDS1 and PDS2) for physical damage or wear.
4. Test the voltage and resistance of the sensors using a multimeter.
5. Examine the wiring and connectors for signs of corrosion, fraying, or loose connections.
6. Check the ECM for any software updates or calibration issues.
7. Perform a visual inspection of the accelerator pedal assembly for mechanical issues.

How to fix DTC P1263 step-by-step instructions

To fix DTC P1263, follow these steps:

1. Address any wiring or connector issues found during diagnosis.
2. If the accelerator pedal position sensors are faulty, replace them with new ones.
3. Ensure that the new sensors are properly calibrated according to manufacturer specifications.
4. Check and update the ECM software if necessary.
5. Reassemble any components that were removed during the inspection.
6. Clear the DTC using an OBD-II scanner.
7. Test drive the vehicle to ensure the issue is resolved and the check engine light does not reappear.

How to erase DTC P1263

To erase DTC P1263, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.