P1268 – OBD-II DTC

OBD-II DTC P1268 – Cylinder #3 High To Low Side Short

DTC P1268 meaning

DTC P1268 refers to a diagnostic trouble code indicating a high to low side short circuit in the cylinder #3 fuel injector circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various components of the vehicle’s engine and emissions systems. When the Engine Control Module (ECM) detects an abnormal voltage condition in the fuel injector circuit for cylinder #3, it triggers this code to alert the technician of a potential issue.

DTC P1268 symptoms

Common symptoms associated with DTC P1268 may include:

• Engine misfires or rough idling
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated
• Difficulty starting the engine

DTC P1268 causes

Several factors can lead to the triggering of DTC P1268, including:

• Short circuit in the wiring harness for cylinder #3 injector
• Faulty fuel injector for cylinder #3
• Defective Engine Control Module (ECM)
• Corroded or damaged electrical connectors
• Issues with the fuel injector driver circuit

DTC P1268 seriousness

DTC P1268 is considered a serious issue as it can lead to engine performance problems and increased emissions. If left unaddressed, it may cause further damage to the engine or fuel system components. It is advisable to diagnose and repair the issue promptly to ensure optimal vehicle performance and compliance with emissions regulations.

How to diagnose DTC P1268

To diagnose DTC P1268, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1268 code.
2. Inspect the wiring and connectors for cylinder #3 injector for any visible damage or corrosion.
3. Check the resistance of the fuel injector to ensure it is within specifications.
4. Test the voltage and ground at the injector connector while the engine is running.
5. Examine the ECM for any faults or issues that may affect the injector operation.

How to fix DTC P1268 step-by-step instructions

To fix DTC P1268, follow these step-by-step instructions:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to cylinder #3 injector.
3. If the fuel injector is faulty, replace it with a new one.
4. Reconnect all electrical connections and ensure they are secure.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Start the engine and monitor for any reoccurrence of the P1268 code.

How to erase DTC P1268

To erase DTC P1268, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.