P1275 – OBD-II DTC

OBD-II DTC P1275 – Engine RPM Or Speed Limiter Reached

DTC P1275 meaning

DTC P1275 refers to a diagnostic trouble code indicating that the engine RPM or speed limiter has been reached. This code is triggered when the vehicle’s engine control module (ECM) detects that the engine has exceeded its predetermined RPM limit, which is a protective measure to prevent engine damage. The code can be associated with various factors, including engine performance issues or malfunctions in the vehicle’s speed control systems.

DTC P1275 symptoms

Common symptoms associated with DTC P1275 may include:

• Engine stalling or misfiring
• Loss of power during acceleration
• Unusual engine noises
• Check Engine Light illuminated
• Inability to exceed a certain speed

DTC P1275 causes

Several factors can lead to the triggering of DTC P1275, including:

• Faulty throttle position sensor (TPS)
• Malfunctioning engine control module (ECM)
• Issues with the vehicle’s speed sensor
• Wiring or connector problems in the throttle or speed control circuits
• Excessive engine load or performance issues

DTC P1275 seriousness

DTC P1275 is considered a serious issue as it indicates that the engine is operating outside of its safe parameters. If left unaddressed, it can lead to further engine damage, reduced performance, and potential safety hazards while driving. It is important to diagnose and resolve the underlying issues promptly to ensure the vehicle operates safely and efficiently.

How to diagnose DTC P1275

To diagnose DTC P1275, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1275 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the throttle position sensor and its wiring for damage or disconnection.
4. Test the vehicle’s speed sensor for proper operation.
5. Examine the engine control module for any signs of malfunction.
6. Perform a visual inspection of the engine and related components for any obvious issues.

How to fix DTC P1275 step-by-step instructions

To fix DTC P1275, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Test drive the vehicle to see if the code reappears.
3. If the code returns, inspect the throttle position sensor and replace it if faulty.
4. Check the wiring and connectors for the throttle and speed sensors, repairing or replacing as necessary.
5. Test the speed sensor and replace it if it is not functioning correctly.
6. Inspect the engine control module for any faults and replace it if necessary.
7. After repairs, clear the codes again and perform a test drive to ensure the issue is resolved.

How to erase DTC P1275

To erase DTC P1275, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to erase the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.