P1288 – OBD-II DTC

OBD-II DTC P1288 – IPR Circuit Failure

DTC P1288 meaning

DTC P1288 refers to a diagnostic trouble code indicating an IPR (Injection Pressure Regulator) circuit failure. This code is specific to certain diesel engines, particularly those equipped with a 7.3L Power Stroke engine. The IPR is responsible for regulating the oil pressure that controls the fuel injectors, and a failure in this circuit can lead to performance issues.

DTC P1288 symptoms

Common symptoms associated with DTC P1288 may include:

• Engine misfires or rough idling
• Loss of power during acceleration
• Difficulty starting the engine
• Increased exhaust smoke
• Check Engine Light illuminated

DTC P1288 causes

Several factors can lead to the triggering of DTC P1288, including:

• Faulty IPR sensor or wiring
• Oil contamination or low oil levels
• Faulty engine control module (ECM)
• Electrical shorts or open circuits in the IPR circuit
• Faulty oil pump or low oil pressure

DTC P1288 seriousness

DTC P1288 is considered a serious issue as it can affect engine performance and reliability. If left unaddressed, it may lead to further engine damage or failure. It is important to diagnose and repair the underlying cause promptly to ensure optimal engine operation.

How to diagnose DTC P1288

To diagnose DTC P1288, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1288 code.
2. Inspect the IPR sensor and wiring for any visible damage or corrosion.
3. Check the engine oil level and condition.
4. Test the IPR circuit for continuity and proper voltage.
5. Examine the ECM for any fault codes or issues.
6. Perform a functional test of the IPR to ensure it operates correctly.

How to fix DTC P1288 step-by-step instructions

To fix DTC P1288, follow these steps:

1. Address any oil level or quality issues by changing the oil if necessary.
2. Repair or replace any damaged wiring or connectors in the IPR circuit.
3. Replace the faulty IPR sensor if testing indicates it is not functioning properly.
4. Clear any fault codes from the ECM using an OBD-II scanner.
5. Test drive the vehicle to ensure the issue is resolved and the check engine light does not reappear.

How to erase DTC P1288

To erase DTC P1288, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.