P1301 – OBD-II DTC

OBD-II DTC P1301 – Multi-faults – Bank 2 – With Low Side Shorts

DTC P1301 meaning

DTC P1301 refers to a diagnostic trouble code indicating a multi-fault condition in Bank 2 of the engine, specifically associated with low side shorts. This code is often related to issues in the ignition system, fuel system, or other components that can affect engine performance. The “low side shorts” aspect suggests that there may be a short circuit in the wiring or components that control the operation of the engine’s systems on Bank 2.

DTC P1301 symptoms

Common symptoms associated with DTC P1301 may include:

• Check Engine Light illuminated
• Engine misfires or runs rough
• Decreased engine performance
• Increased fuel consumption
• Difficulty starting the engine

DTC P1301 causes

Several factors can lead to the triggering of DTC P1301, including:

• Faulty ignition coils or spark plugs
• Wiring issues, such as shorts or open circuits in the ignition system
• Faulty fuel injectors or fuel delivery problems
• Malfunctioning engine control module (ECM)
• Vacuum leaks affecting air-fuel mixture

DTC P1301 seriousness

DTC P1301 is considered a serious issue as it can lead to significant engine performance problems. If left unaddressed, it may result in further damage to engine components, increased emissions, and potential failure to pass emissions tests. It is advisable to diagnose and repair the underlying issues promptly to ensure optimal engine operation.

How to diagnose DTC P1301

To diagnose DTC P1301, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P1301.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors related to Bank 2 for signs of damage or corrosion.
4. Test the ignition coils and spark plugs for proper operation.
5. Examine the fuel injectors and fuel delivery system for issues.
6. Perform a visual inspection for vacuum leaks in the intake system.
7. Check the engine control module (ECM) for faults or updates.

How to fix DTC P1301 step-by-step instructions

To fix DTC P1301, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Repair any damaged wiring or connectors found during diagnosis.
3. Replace faulty ignition coils or spark plugs as needed.
4. Fix any fuel delivery issues, such as replacing clogged fuel injectors.
5. Address any vacuum leaks by replacing damaged hoses or gaskets.
6. Recheck the ECM for updates or reprogramming if necessary.
7. After repairs, clear the codes again and take the vehicle for a test drive to ensure the issue is resolved.

How to erase DTC P1301

To erase DTC P1301, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.