P1307 – OBD-II DTC

OBD-II DTC P1307 – Boost Calibration Low

DTC P1307 meaning

DTC P1307 refers to a diagnostic trouble code indicating a “Boost Calibration Low” condition in the vehicle’s engine management system. This code is typically associated with turbocharged or supercharged engines where the boost pressure is lower than expected during operation. The engine control module (ECM) monitors the boost levels and compares them to the desired values. When the actual boost is significantly lower than the calibrated value, this code is triggered.

DTC P1307 symptoms

Common symptoms associated with DTC P1307 may include:

• Reduced engine power or performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated
• Turbo lag or delayed throttle response
• Unusual engine noises, such as whistling or hissing

DTC P1307 causes

Several factors can lead to the triggering of DTC P1307, including:

• Faulty boost pressure sensor
• Leaking or damaged intake or vacuum hoses
• Faulty turbocharger or supercharger
• Clogged air filter or exhaust system
• ECM software issues or calibration errors
• Electrical issues, such as poor connections or damaged wiring

DTC P1307 seriousness

The seriousness of DTC P1307 can vary depending on the underlying cause. While it may not immediately lead to severe engine damage, it can result in:

• Decreased engine efficiency
• Increased emissions
• Potential long-term damage if left unaddressed

It is advisable to diagnose and repair the issue promptly to maintain optimal vehicle performance.

How to diagnose DTC P1307

To diagnose DTC P1307, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1307 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the boost pressure sensor and its wiring for damage or disconnection.
4. Examine all intake and vacuum hoses for leaks or blockages.
5. Test the turbocharger or supercharger for proper operation.
6. Check the air filter and exhaust system for clogs.
7. Review the ECM software for any updates or calibration issues.

How to fix DTC P1307 step-by-step instructions

To fix DTC P1307, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Perform a visual inspection of the boost pressure sensor and wiring.
3. Replace any damaged or disconnected components.
4. Inspect and replace any leaking or damaged intake or vacuum hoses.
5. Test the turbocharger or supercharger for proper functionality and replace if necessary.
6. Replace a clogged air filter or exhaust component as needed.
7. Reprogram or update the ECM if software issues are identified.
8. Recheck for DTCs after repairs and ensure the vehicle operates normally.

How to erase DTC P1307

To erase DTC P1307, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the trouble codes menu on the scanner.
4. Select the option to clear or erase codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.