OBD-II DTC P1313 – EGR Calibration Low
DTC P1313 meaning
DTC P1313 refers to a diagnostic trouble code indicating that the Engine Control Module (ECM) has detected a low calibration value for the Exhaust Gas Recirculation (EGR) system. This code suggests that the EGR system is not functioning within the expected parameters, which can lead to increased emissions and reduced engine performance.
DTC P1313 symptoms
Common symptoms associated with DTC P1313 may include:
- Check Engine Light (CEL) illuminated
- Decreased engine performance
- Rough idling or stalling
- Increased emissions
- Reduced fuel efficiency
DTC P1313 causes
Several factors can contribute to the occurrence of DTC P1313, including:
- Faulty EGR valve
- Clogged EGR passages
- Malfunctioning EGR temperature sensor
- Issues with the ECM or its calibration
- Vacuum leaks in the EGR system
DTC P1313 seriousness
DTC P1313 is considered a moderate to serious issue. While it may not cause immediate engine failure, it can lead to:
- Increased emissions, potentially failing emissions tests
- Long-term engine damage if left unaddressed
- Decreased fuel efficiency, leading to higher operating costs
How to diagnose DTC P1313
To diagnose DTC P1313, follow these steps:
- Use an OBD-II scanner to confirm the presence of the code.
- Inspect the EGR valve and its connections for damage or blockages.
- Check for vacuum leaks in the EGR system.
- Test the EGR temperature sensor for proper operation.
- Review the ECM for any software updates or calibration issues.
How to fix DTC P1313 step-by-step instructions
To fix DTC P1313, follow these steps:
- Clear the DTC using an OBD-II scanner.
- Inspect and clean the EGR valve and passages.
- Replace the EGR valve if it is found to be faulty.
- Repair any vacuum leaks in the EGR system.
- Test and replace the EGR temperature sensor if necessary.
- Reprogram or update the ECM if calibration issues are identified.
- Perform a road test to ensure the issue is resolved.
How to erase DTC P1313
To erase DTC P1313, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn on the ignition without starting the engine.
- Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
- Confirm the action to clear the trouble codes.
- Disconnect the scanner and start the engine to verify that the code does not return.
Recommended tools for OBD-II diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.