P1336 – OBD-II DTC

OBD-II DTC P1336 – Misfire Rate Catalyst Damage Fault – Bank 1

DTC P1336 meaning

DTC P1336 refers to a diagnostic trouble code indicating a misfire rate that may lead to catalyst damage on Bank 1 of the engine. This code is triggered when the Engine Control Module (ECM) detects a misfire condition that could potentially harm the catalytic converter due to unburned fuel entering the exhaust system. The misfire rate is monitored, and if it exceeds a certain threshold, the code is set to alert the technician of the issue.

DTC P1336 symptoms

Common symptoms associated with DTC P1336 may include:

• Check Engine Light illuminated
• Rough idling or engine shaking
• Decreased engine performance
• Increased fuel consumption
• Unusual exhaust emissions

DTC P1336 causes

Several factors can contribute to the triggering of DTC P1336, including:

• Faulty spark plugs or ignition coils
• Vacuum leaks in the intake system
• Fuel delivery issues, such as a clogged fuel filter or failing fuel pump
• Faulty sensors, including the Mass Air Flow (MAF) sensor or Oxygen sensors
• Engine mechanical issues, such as worn piston rings or valves

DTC P1336 seriousness

DTC P1336 is considered a serious issue as it indicates a misfire condition that can lead to significant engine damage if not addressed. Prolonged misfiring can result in:

• Damage to the catalytic converter
• Increased emissions, potentially leading to failing emissions tests
• Reduced engine efficiency and performance

How to diagnose DTC P1336

To diagnose DTC P1336, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1336 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the spark plugs and ignition coils for wear or damage.
4. Examine the intake system for vacuum leaks.
5. Test the fuel delivery system, including the fuel pump and filter.
6. Check the operation of relevant sensors, such as the MAF and Oxygen sensors.
7. Perform a compression test to assess engine mechanical condition.

How to fix DTC P1336 step-by-step instructions

To fix DTC P1336, follow these steps:

1. Address any identified issues from the diagnostic process, such as replacing faulty spark plugs or ignition coils.
2. Repair any vacuum leaks found in the intake system.
3. Replace or clean the fuel filter and ensure the fuel pump is functioning correctly.
4. Replace any malfunctioning sensors, such as the MAF or Oxygen sensors.
5. Fix any mechanical issues identified during the compression test.
6. Clear the DTC using an OBD-II scanner and take the vehicle for a test drive to ensure the issue is resolved.

How to erase DTC P1336

To erase DTC P1336, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the codes.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.