P1341 – OBD-II DTC

OBD-II DTC P1341 – Persistent Misfire

DTC P1341 meaning

DTC P1341 refers to a persistent misfire detected by the On-Board Diagnostics II (OBD-II) system. This code indicates that the engine control module (ECM) has identified a misfire condition that is not intermittent, meaning it occurs consistently under certain conditions. The misfire can lead to poor engine performance, increased emissions, and potential damage to the engine if not addressed.

DTC P1341 symptoms

Common symptoms associated with DTC P1341 may include:

• Rough idling or engine shaking
• Decreased engine power and acceleration
• Increased fuel consumption
• Check Engine Light illuminated
• Unusual engine noises, such as backfiring

DTC P1341 causes

Several factors can contribute to the occurrence of DTC P1341, including:

• Faulty spark plugs or ignition coils
• Clogged fuel injectors
• Vacuum leaks in the intake system
• Faulty mass air flow (MAF) sensor
• Issues with the engine timing or camshaft position
• Worn or damaged engine components

DTC P1341 seriousness

DTC P1341 is considered a serious issue as it indicates a persistent misfire that can lead to:

• Increased emissions, potentially failing emissions tests
• Engine damage over time due to unburned fuel
• Reduced fuel efficiency
• Potential for catalytic converter damage

How to diagnose DTC P1341

To diagnose DTC P1341, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1341 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the spark plugs and ignition coils for wear or damage.
4. Examine the fuel injectors for clogs or malfunctions.
5. Check for vacuum leaks in the intake system.
6. Test the MAF sensor for proper operation.
7. Verify the engine timing and camshaft position.

How to fix DTC P1341 step-by-step instructions

To fix DTC P1341, follow these step-by-step instructions:

1. Replace faulty spark plugs and ignition coils if necessary.
2. Clean or replace clogged fuel injectors.
3. Repair any vacuum leaks found in the intake system.
4. Replace or clean the MAF sensor if it is malfunctioning.
5. Adjust or repair the engine timing and camshaft position as needed.
6. Clear the DTC using an OBD-II scanner.
7. Test drive the vehicle to ensure the issue is resolved and the code does not return.

How to erase DTC P1341

To erase DTC P1341, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.