DTClookup.com

Search DTC

P1346 – OBD-II DTC

OBD-II DTC P1346 – Injector Circuit / IDM Codes Not Updated

DTC P1346 meaning

DTC P1346 refers to a problem in the injector circuit or the Injector Driver Module (IDM) not updating properly. This code indicates that the Engine Control Module (ECM) has detected an issue with the communication or functionality of the fuel injectors, which can lead to improper fuel delivery and engine performance issues.

DTC P1346 symptoms

Common symptoms associated with DTC P1346 may include:

  • Engine misfires
  • Rough idling
  • Decreased engine performance
  • Increased fuel consumption
  • Check Engine Light (CEL) illuminated

DTC P1346 causes

Several factors can lead to the triggering of DTC P1346, including:

  • Faulty fuel injectors
  • Wiring issues in the injector circuit
  • Defective Injector Driver Module (IDM)
  • ECM software issues
  • Poor electrical connections or corrosion

DTC P1346 seriousness

DTC P1346 can be serious as it affects the engine’s fuel delivery system. If left unaddressed, it may lead to:

  • Severe engine performance issues
  • Increased emissions
  • Potential engine damage

It is advisable to diagnose and repair the issue promptly to avoid further complications.

How to diagnose DTC P1346

To diagnose DTC P1346, follow these steps:

  1. Use an OBD-II scanner to confirm the presence of the code.
  2. Inspect the fuel injector wiring and connectors for damage or corrosion.
  3. Test the fuel injectors for proper resistance and functionality.
  4. Check the Injector Driver Module (IDM) for faults.
  5. Examine the ECM for software updates or faults.

How to fix DTC P1346 step-by-step instructions

To fix DTC P1346, follow these steps:

  1. Repair or replace any damaged wiring or connectors in the injector circuit.
  2. Replace faulty fuel injectors as needed.
  3. Test and replace the Injector Driver Module (IDM) if it is defective.
  4. Update or reprogram the ECM if necessary.
  5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P1346

To erase DTC P1346, follow these steps:

  1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
  2. Turn on the ignition without starting the engine.
  3. Navigate to the DTC menu on the scanner.
  4. Select the option to clear or erase the codes.
  5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

← All OBD-II Diagnostic Trouble Codes

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.