P1354 – OBD-II DTC

OBD-II DTC P1354 – Fuel Level Sensor B Circuit High

DTC P1354 meaning

DTC P1354 refers to a diagnostic trouble code indicating a problem with the fuel level sensor B circuit. This code is triggered when the Engine Control Module (ECM) detects a high voltage signal from the fuel level sensor, which may indicate a malfunction in the sensor or its circuit. The fuel level sensor is responsible for providing accurate fuel level readings to the ECM, which is essential for proper engine performance and fuel management.

DTC P1354 symptoms

Common symptoms associated with DTC P1354 may include:

• Inaccurate fuel gauge readings
• Check Engine Light illuminated
• Possible engine performance issues
• Fuel level warning light may activate

DTC P1354 causes

Several factors can lead to the triggering of DTC P1354, including:

• Faulty fuel level sensor
• Wiring issues or damaged connectors in the fuel level sensor circuit
• Short circuit or open circuit in the sensor circuit
• Faulty Engine Control Module (ECM)

DTC P1354 seriousness

The seriousness of DTC P1354 can vary. While it may not cause immediate engine failure, it can lead to:

• Inaccurate fuel readings, resulting in potential fuel starvation
• Increased emissions due to improper fuel management
• Possible engine performance issues

It is advisable to address this code promptly to avoid further complications.

How to diagnose DTC P1354

To diagnose DTC P1354, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1354 code.
2. Inspect the fuel level sensor and its wiring for any visible damage or corrosion.
3. Check the voltage and ground at the fuel level sensor connector.
4. Test the fuel level sensor using a multimeter to ensure it operates within specifications.
5. Examine the ECM for any faults or updates that may affect sensor readings.

How to fix DTC P1354 step-by-step instructions

To fix DTC P1354, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. If the code reappears, inspect the fuel level sensor and wiring for damage.
3. Replace the fuel level sensor if it is found to be faulty.
4. Repair or replace any damaged wiring or connectors in the sensor circuit.
5. Recheck the voltage and ground at the sensor connector after repairs.
6. Test drive the vehicle to ensure the issue is resolved and the code does not return.

How to erase DTC P1354

To erase DTC P1354, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.