P1360 – OBD-II DTC

OBD-II DTC P1360 – IDM Input Circuit Malfunction/ Ignition Coil Control Circuit High Voltage

DTC P1360 meaning

DTC P1360 refers to a malfunction in the Ignition Coil Control Circuit, specifically indicating a high voltage condition in the IDM (Ignition Driver Module) input circuit. This code is triggered when the Engine Control Module (ECM) detects an abnormal voltage level in the ignition coil control circuit, which can affect engine performance and efficiency.

DTC P1360 symptoms

Common symptoms associated with DTC P1360 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light illuminated

DTC P1360 causes

Several factors can lead to the triggering of DTC P1360, including:

• Faulty ignition coil
• Damaged wiring or connectors in the ignition circuit
• Faulty IDM (Ignition Driver Module)
• ECM software issues
• Short circuits or open circuits in the ignition system

DTC P1360 seriousness

DTC P1360 is considered a serious issue as it can lead to significant engine performance problems. If left unaddressed, it may result in further damage to the ignition system or other engine components, potentially leading to costly repairs. It is advisable to diagnose and resolve this code promptly to maintain vehicle reliability and performance.

How to diagnose DTC P1360

To diagnose DTC P1360, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1360 code.
2. Inspect the ignition coil and associated wiring for visible damage or corrosion.
3. Check the connectors for secure connections and signs of wear.
4. Test the ignition coil for proper resistance and functionality.
5. Examine the IDM for faults or malfunctions.
6. Check the ECM for any software updates or issues.
7. Perform a continuity test on the ignition circuit wiring.

How to fix DTC P1360 step-by-step instructions

To fix DTC P1360, follow these step-by-step instructions:

1. Disconnect the negative battery terminal to ensure safety.
2. Inspect and repair any damaged wiring or connectors in the ignition circuit.
3. Replace the faulty ignition coil if testing indicates it is not functioning properly.
4. Test and, if necessary, replace the IDM.
5. Recheck all connections and ensure they are secure.
6. Reconnect the negative battery terminal.
7. Clear the DTC using an OBD-II scanner and take the vehicle for a test drive to verify the repair.

How to erase DTC P1360

To erase DTC P1360, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.