P1362 – OBD-II DTC

OBD-II DTC P1362 – Ignition Coil B Primary Circuit Malfunction

DTC P1362 meaning

DTC P1362 refers to a malfunction in the primary circuit of Ignition Coil B. This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected an issue with the electrical circuit that powers the ignition coil responsible for firing one of the engine’s cylinders. The ignition coil converts the battery’s low voltage into the high voltage needed to create a spark at the spark plug, which ignites the air-fuel mixture in the combustion chamber.

DTC P1362 symptoms

Common symptoms associated with DTC P1362 may include:

• Engine misfires or rough idling
• Decreased engine performance
• Difficulty starting the engine
• Illuminated check engine light
• Increased fuel consumption

DTC P1362 causes

Several factors can lead to the triggering of DTC P1362, including:

• Faulty ignition coil B
• Open or shorted wiring in the ignition coil circuit
• Defective Engine Control Module (ECM)
• Poor electrical connections or corroded terminals
• Faulty spark plugs or ignition components

DTC P1362 seriousness

DTC P1362 is considered a serious issue as it can lead to engine misfires, which may cause further damage to the engine over time. If left unaddressed, it can result in poor engine performance, increased emissions, and potential failure to pass emissions tests. It is advisable to diagnose and repair the issue promptly to maintain vehicle reliability and performance.

How to diagnose DTC P1362

To diagnose DTC P1362, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P1362.
2. Inspect the ignition coil B and its wiring for visible damage or corrosion.
3. Check the electrical connections to ensure they are secure and free of corrosion.
4. Test the ignition coil B using a multimeter to check for proper resistance.
5. Inspect related components, such as spark plugs and ignition module, for faults.
6. Clear the DTC and perform a test drive to see if the code reappears.

How to fix DTC P1362 step-by-step instructions

To fix DTC P1362, follow these steps:

1. Identify and replace the faulty ignition coil B if testing indicates it is defective.
2. Repair or replace any damaged wiring or connectors in the ignition coil circuit.
3. Ensure all electrical connections are clean and secure.
4. Replace any faulty spark plugs or ignition components as necessary.
5. Recheck the system to ensure the issue is resolved and no further codes are present.

How to erase DTC P1362

To erase DTC P1362, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes from the ECM.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.