P1363 – OBD-II DTC

OBD-II DTC P1363 – Ignition Coil C Primary Circuit Malfunction

DTC P1363 meaning

DTC P1363 refers to a malfunction in the primary circuit of Ignition Coil C. This code indicates that the Engine Control Module (ECM) has detected an issue with the electrical circuit that powers the ignition coil responsible for firing the spark plug in cylinder C. The ignition coil is crucial for converting battery voltage into the high voltage needed to create a spark for combustion.

DTC P1363 symptoms

Common symptoms associated with DTC P1363 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light illuminated

DTC P1363 causes

Several factors can lead to the triggering of DTC P1363, including:

• Faulty ignition coil C
• Open or shorted wiring in the ignition coil circuit
• Defective ECM
• Poor electrical connections or corroded terminals
• Faulty spark plugs or ignition components

DTC P1363 seriousness

DTC P1363 is considered a serious issue as it can lead to engine misfires, which may cause further damage to the engine over time. If left unaddressed, it can result in poor engine performance, increased emissions, and potential failure to pass emissions tests. It is advisable to diagnose and repair the issue promptly to maintain vehicle reliability and performance.

How to diagnose DTC P1363

To diagnose DTC P1363, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1363 code.
2. Inspect the ignition coil C and its wiring for visible damage or corrosion.
3. Check the electrical connections to ensure they are secure and free of corrosion.
4. Test the ignition coil C using a multimeter to check for proper resistance.
5. Inspect the spark plugs for wear or damage and replace if necessary.
6. Examine the ECM for any signs of malfunction or failure.

How to fix DTC P1363 step-by-step instructions

To fix DTC P1363, follow these steps:

1. Disconnect the negative battery terminal to ensure safety.
2. Replace the faulty ignition coil C if testing indicates it is defective.
3. Repair or replace any damaged wiring or connectors in the ignition coil circuit.
4. Ensure all electrical connections are clean and secure.
5. Replace any worn or damaged spark plugs.
6. Reconnect the negative battery terminal.
7. Clear the DTC using an OBD-II scanner and test drive the vehicle to see if the code returns.

How to erase DTC P1363

To erase DTC P1363, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.