P1364 – OBD-II DTC

OBD-II DTC P1364 – Ignition Coil D Primary Circuit Malfunction

DTC P1364 meaning

DTC P1364 refers to a malfunction in the primary circuit of the ignition coil D. This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected an issue with the electrical circuit that powers the ignition coil responsible for firing the engine’s cylinders. The ignition coil is crucial for converting the battery’s low voltage into the high voltage needed to create a spark at the spark plugs, which ignites the air-fuel mixture in the engine.

DTC P1364 symptoms

Common symptoms associated with DTC P1364 may include:

• Engine misfires or rough idling
• Decreased engine performance
• Difficulty starting the engine
• Illuminated check engine light
• Increased fuel consumption

DTC P1364 causes

Several factors can lead to the triggering of DTC P1364, including:

• Faulty ignition coil D
• Open or shorted wiring in the ignition coil circuit
• Defective ignition coil connector
• Issues with the Engine Control Module (ECM)
• Faulty spark plugs or ignition system components

DTC P1364 seriousness

DTC P1364 is considered a serious issue as it can lead to engine misfires, which may cause further damage to the engine over time. If left unaddressed, it can result in poor engine performance, increased emissions, and potential failure to start. It is advisable to diagnose and repair the issue promptly to maintain vehicle reliability and performance.

How to diagnose DTC P1364

To diagnose DTC P1364, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P1364.
2. Inspect the ignition coil D and its wiring for visible damage or corrosion.
3. Check the ignition coil connector for proper connection and signs of wear.
4. Test the ignition coil D using a multimeter to ensure it is functioning correctly.
5. Examine the ECM for any software updates or faults.
6. Clear the DTC and perform a road test to see if the code reappears.

How to fix DTC P1364 step-by-step instructions

To fix DTC P1364, follow these steps:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to ignition coil D.
3. If the ignition coil D is faulty, replace it with a new one.
4. Reconnect the ignition coil connector securely.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Start the engine and perform a road test to verify that the issue is resolved.

How to erase DTC P1364

To erase DTC P1364, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner and select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the engine to ensure the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.