P1366 – OBD-II DTC

OBD-II DTC P1366 – Ignition Control (IC) Circuit Low Voltage

DTC P1366 meaning

DTC P1366 refers to a diagnostic trouble code indicating a low voltage condition in the Ignition Control (IC) circuit. This code is typically triggered when the Engine Control Module (ECM) detects that the voltage in the ignition control circuit is below the expected threshold. The ignition control circuit is crucial for managing the timing and operation of the ignition system, which is essential for engine performance.

DTC P1366 symptoms

Common symptoms associated with DTC P1366 may include:

• Engine misfires or runs rough
• Difficulty starting the engine
• Decreased engine performance
• Illuminated check engine light
• Increased fuel consumption

DTC P1366 causes

Several factors can lead to the triggering of DTC P1366, including:

• Faulty ignition control module
• Wiring issues such as shorts or open circuits in the ignition control circuit
• Corroded or loose connectors
• Faulty sensors related to the ignition system
• ECM malfunction

DTC P1366 seriousness

DTC P1366 can be considered serious as it affects the ignition system’s performance. If left unaddressed, it may lead to:

• Increased emissions
• Potential engine damage due to misfiring
• Failure to start the vehicle

It is advisable to diagnose and repair the issue promptly to ensure optimal engine performance and reliability.

How to diagnose DTC P1366

To diagnose DTC P1366, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1366 code.
2. Inspect the ignition control circuit wiring and connectors for damage or corrosion.
3. Test the ignition control module for proper operation.
4. Check related sensors for faults.
5. Examine the ECM for any signs of malfunction.

How to fix DTC P1366 step-by-step instructions

To fix DTC P1366, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors in the ignition control circuit.
3. Replace the ignition control module if it is found to be faulty.
4. Test and replace any faulty sensors related to the ignition system.
5. Recheck the ECM for proper function and replace if necessary.
6. Start the engine and monitor for any reoccurrence of the DTC.

How to erase DTC P1366

To erase DTC P1366, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.