P1369 – OBD-II DTC

OBD-II DTC P1369 – Ignition Coil Primary Circuit Failure

DTC P1369 meaning

DTC P1369 refers to an “Ignition Coil Primary Circuit Failure.” This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected a malfunction in the primary circuit of the ignition coil. The ignition coil is responsible for converting the battery’s low voltage into the high voltage needed to create a spark in the engine’s cylinders. A failure in this circuit can lead to poor engine performance, misfires, or even engine stalling.

DTC P1369 symptoms

Common symptoms associated with DTC P1369 may include:

• Engine misfires
• Difficulty starting the engine
• Rough idling
• Decreased engine power
• Increased fuel consumption
• Illuminated check engine light

DTC P1369 causes

Several factors can lead to the triggering of DTC P1369, including:

• Faulty ignition coil
• Wiring issues in the ignition coil circuit
• Defective ECM
• Corroded or loose connectors
• Faulty ignition coil driver circuit

DTC P1369 seriousness

DTC P1369 is considered a serious issue as it can lead to significant engine performance problems. If left unaddressed, it may result in further engine damage, increased emissions, and potential safety hazards due to engine stalling. It is advisable to diagnose and repair the issue promptly to ensure the vehicle operates efficiently and safely.

How to diagnose DTC P1369

To diagnose DTC P1369, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P1369.
2. Inspect the ignition coil and its wiring for visible damage or corrosion.
3. Check the connectors for tightness and signs of wear.
4. Test the ignition coil’s resistance using a multimeter to ensure it is within specifications.
5. Examine the ECM for any fault codes or issues related to the ignition coil driver circuit.
6. Perform a continuity test on the wiring to ensure there are no breaks or shorts.

How to fix DTC P1369 step-by-step instructions

To fix DTC P1369, follow these step-by-step instructions:

1. Disconnect the negative battery terminal to ensure safety.
2. Inspect and repair any damaged wiring or connectors in the ignition coil circuit.
3. If the ignition coil is faulty, replace it with a new one.
4. Reconnect all connectors and ensure they are secure.
5. Reconnect the negative battery terminal.
6. Clear the DTC using an OBD-II scanner.
7. Start the engine and monitor for any reoccurrence of the code or symptoms.

How to erase DTC P1369

To erase DTC P1369, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.