P1380 – OBD-II DTC

OBD-II DTC P1380 – Ignition Coil – Cylinder 2 – Early Activation Fault

DTC P1380 meaning

DTC P1380 refers to an “Ignition Coil – Cylinder 2 – Early Activation Fault.” This diagnostic trouble code indicates that the engine control module (ECM) has detected an issue with the ignition coil for cylinder 2, specifically that it is activating earlier than expected during the ignition cycle. This can lead to misfires and poor engine performance.

DTC P1380 symptoms

Common symptoms associated with DTC P1380 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated

DTC P1380 causes

Several factors can contribute to the occurrence of DTC P1380, including:

• Faulty ignition coil for cylinder 2
• Wiring issues or short circuits in the ignition system
• Faulty ECM or software issues
• Bad spark plug or incorrect spark plug gap
• Vacuum leaks affecting cylinder performance

DTC P1380 seriousness

DTC P1380 can be considered serious as it may lead to engine misfires, which can cause further damage to the engine over time. Ignoring this code can result in:

• Increased emissions
• Poor fuel economy
• Potential damage to the catalytic converter
• Overall reduced engine performance

How to diagnose DTC P1380

To diagnose DTC P1380, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1380 code.
2. Inspect the ignition coil for cylinder 2 for any visible damage or wear.
3. Check the wiring and connectors associated with the ignition coil for any signs of corrosion or damage.
4. Test the ignition coil using a multimeter to ensure it is functioning within specifications.
5. Inspect the spark plug for cylinder 2 and replace it if necessary.
6. Check for vacuum leaks that may affect cylinder performance.
7. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P1380 step-by-step instructions

To fix DTC P1380, follow these steps:

1. Replace the faulty ignition coil for cylinder 2 if testing indicates it is defective.
2. Repair or replace any damaged wiring or connectors associated with the ignition coil.
3. Replace the spark plug for cylinder 2 if it is worn or damaged.
4. Address any vacuum leaks found during the diagnosis.
5. Recheck the ignition system to ensure all components are functioning correctly.
6. Clear the DTC using an OBD-II scanner.
7. Perform a test drive to confirm that the issue has been resolved and the code does not return.

How to erase DTC P1380

To erase DTC P1380, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “ON” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.