P1382 – OBD-II DTC

OBD-II DTC P1382 – Crankshaft Position (CKP)/Ignition Coil – Cylinder 4 – Early Activation Fault

DTC P1382 meaning

DTC P1382 refers to a diagnostic trouble code indicating an issue with the Crankshaft Position (CKP) sensor or the ignition coil for cylinder 4. Specifically, it signifies an early activation fault, meaning that the ignition coil for cylinder 4 is being activated sooner than expected in relation to the crankshaft position sensor’s readings. This can lead to improper timing of the ignition event, affecting engine performance.

DTC P1382 symptoms

Common symptoms associated with DTC P1382 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated

DTC P1382 causes

Several factors can contribute to the occurrence of DTC P1382, including:

• Faulty crankshaft position sensor
• Defective ignition coil for cylinder 4
• Wiring issues or poor connections in the CKP sensor circuit
• Faulty engine control module (ECM)
• Timing belt or chain issues affecting crankshaft position

DTC P1382 seriousness

DTC P1382 is considered a serious issue as it can lead to engine misfires and poor performance. If left unaddressed, it may cause further damage to the engine components, increase emissions, and lead to more costly repairs. It is advisable to diagnose and resolve this code promptly to maintain optimal engine function.

How to diagnose DTC P1382

To diagnose DTC P1382, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1382 code.
2. Inspect the crankshaft position sensor and its wiring for damage or disconnection.
3. Check the ignition coil for cylinder 4 for any signs of failure.
4. Test the resistance of the ignition coil to ensure it is within specifications.
5. Examine the timing belt or chain for proper alignment and condition.
6. Review the ECM for any software updates or faults.

How to fix DTC P1382 step-by-step instructions

To fix DTC P1382, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and replace the crankshaft position sensor if faulty.
3. Replace the ignition coil for cylinder 4 if it is defective.
4. Repair or replace any damaged wiring or connectors in the CKP sensor circuit.
5. Ensure the timing belt or chain is properly aligned and in good condition.
6. Recheck the ECM for any updates or faults and reprogram if necessary.
7. Test drive the vehicle to ensure the issue is resolved and the code does not return.

How to erase DTC P1382

To erase DTC P1382, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the engine to verify that the code has been cleared.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.