P1383 – OBD-II DTC

OBD-II DTC P1383 – Ignition Coil – Cylinder 5 – Early Activation Fault

DTC P1383 meaning

DTC P1383 refers to an “Ignition Coil – Cylinder 5 – Early Activation Fault.” This diagnostic trouble code indicates that the engine control module (ECM) has detected an issue with the ignition coil for cylinder 5, specifically that it is activating earlier than expected during the ignition cycle. This can lead to misfires and poor engine performance.

DTC P1383 symptoms

Common symptoms associated with DTC P1383 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated

DTC P1383 causes

Several factors can contribute to the occurrence of DTC P1383, including:

• Faulty ignition coil for cylinder 5
• Wiring issues or short circuits in the ignition coil circuit
• Faulty ECM or software issues
• Bad spark plug or incorrect spark plug gap
• Vacuum leaks affecting cylinder performance

DTC P1383 seriousness

DTC P1383 is considered a serious issue as it can lead to engine misfires, which may cause further damage to the engine over time. Ignoring this code can result in:

• Increased emissions
• Poor fuel economy
• Potential damage to the catalytic converter
• Overall reduced engine performance

How to diagnose DTC P1383

To diagnose DTC P1383, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1383 code.
2. Inspect the ignition coil for cylinder 5 for any visible damage or wear.
3. Check the wiring and connectors associated with the ignition coil for any signs of corrosion or damage.
4. Test the ignition coil using a multimeter to ensure it is functioning within specifications.
5. Inspect the spark plug for cylinder 5 and replace it if necessary.
6. Check for vacuum leaks around the intake manifold and throttle body.
7. Review the ECM for any software updates or faults.

How to fix DTC P1383 step-by-step instructions

To fix DTC P1383, follow these steps:

1. Replace the faulty ignition coil for cylinder 5 if testing indicates it is defective.
2. Repair or replace any damaged wiring or connectors in the ignition coil circuit.
3. Replace the spark plug for cylinder 5 if it is worn or damaged.
4. Address any vacuum leaks found during the diagnosis.
5. Reprogram or update the ECM if necessary.
6. Clear the DTC using an OBD-II scanner and perform a test drive to ensure the issue is resolved.

How to erase DTC P1383

To erase DTC P1383, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.