P1385 – OBD-II DTC

OBD-II DTC P1385 – Misfire Detected – Rough Road Data Not Available

DTC P1385 meaning

DTC P1385 refers to a diagnostic trouble code indicating that a misfire has been detected in the engine, specifically when the rough road data is not available. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various engine parameters to ensure optimal performance and emissions control. The absence of rough road data suggests that the vehicle’s sensors are unable to provide accurate information regarding road conditions, which can affect the engine’s performance and misfire detection.

DTC P1385 symptoms

Common symptoms associated with DTC P1385 may include:

• Engine misfires or rough idling
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light illuminated
• Unusual engine noises

DTC P1385 causes

Several factors can contribute to the triggering of DTC P1385, including:

• Faulty ignition components (spark plugs, ignition coils)
• Fuel delivery issues (clogged fuel injectors, fuel pump failure)
• Vacuum leaks in the intake system
• Faulty sensors (crankshaft position sensor, camshaft position sensor)
• Wiring or connector issues related to the engine management system
• Software glitches in the engine control module (ECM)

DTC P1385 seriousness

DTC P1385 can be considered serious as it indicates that the engine is misfiring, which can lead to:

• Increased emissions and potential failure of emissions tests
• Damage to the catalytic converter due to unburned fuel
• Reduced engine efficiency and performance
• Potential for further engine damage if not addressed

How to diagnose DTC P1385

To diagnose DTC P1385, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1385 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the ignition system components for wear or damage.
4. Examine the fuel system for proper operation and delivery.
5. Check for vacuum leaks in the intake system.
6. Test the relevant sensors for proper functionality.
7. Inspect wiring and connectors for damage or corrosion.
8. Perform a visual inspection of the engine for any obvious issues.

How to fix DTC P1385 step-by-step instructions

To fix DTC P1385, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Conduct a thorough inspection of the ignition system and replace any faulty components.
3. Check and clean or replace fuel injectors as necessary.
4. Repair any vacuum leaks found in the intake system.
5. Test and replace faulty sensors, if needed.
6. Repair or replace damaged wiring and connectors.
7. Recheck the system by running the vehicle and monitoring for any reoccurrence of the code.

How to erase DTC P1385

To erase DTC P1385 from the vehicle’s computer, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.