OBD-II DTC P1403 – VVT Solenoid B Circuit High Input
DTC P1403 meaning
DTC P1403 refers to a diagnostic trouble code indicating a high input signal from the Variable Valve Timing (VVT) solenoid B circuit. This code is part of the OBD-II system, which monitors various components of the vehicle’s engine and emissions systems. The VVT solenoid is responsible for controlling the timing of the engine’s intake and exhaust valves, optimizing performance and efficiency.
DTC P1403 symptoms
Common symptoms associated with DTC P1403 may include:
- Check Engine Light illuminated
- Reduced engine performance
- Poor fuel economy
- Rough idling or stalling
- Increased emissions
DTC P1403 causes
Several factors can lead to the triggering of DTC P1403, including:
- Faulty VVT solenoid
- Wiring issues or short circuits in the VVT circuit
- Faulty engine control module (ECM)
- Oil flow issues affecting the VVT system
- Contaminated or low engine oil
DTC P1403 seriousness
DTC P1403 can be considered serious as it may affect engine performance and fuel efficiency. If left unaddressed, it could lead to further engine damage or increased emissions, potentially causing the vehicle to fail emissions testing. It is advisable to diagnose and repair the issue promptly.
How to diagnose DTC P1403
To diagnose DTC P1403, follow these steps:
- Use an OBD-II scanner to confirm the code and check for any additional codes.
- Inspect the VVT solenoid and its wiring for damage or corrosion.
- Check the engine oil level and condition.
- Test the VVT solenoid operation using a multimeter.
- Examine the engine control module (ECM) for faults.
How to fix DTC P1403 step-by-step instructions
To fix DTC P1403, follow these steps:
- Inspect and repair any damaged wiring or connectors in the VVT circuit.
- Replace the faulty VVT solenoid if necessary.
- Change the engine oil if it is low or contaminated.
- Clear any debris from the VVT system to ensure proper oil flow.
- Recheck the system with an OBD-II scanner to ensure the code does not return.
How to erase DTC P1403
To erase DTC P1403, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn on the ignition without starting the engine.
- Navigate to the option to clear or erase trouble codes on the scanner.
- Confirm the action to erase the codes.
- Disconnect the scanner and start the engine to verify that the code does not return.
Recommended tools for OBD-II diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.