P1407 – OBD-II DTC

OBD-II DTC P1407 – EGR Metering Orifice Restricted

DTC P1407 meaning

DTC P1407 refers to a diagnostic trouble code indicating that the EGR (Exhaust Gas Recirculation) metering orifice is restricted. This code is triggered when the engine control module (ECM) detects an issue with the flow of exhaust gases through the EGR system, which is essential for reducing nitrogen oxide (NOx) emissions and improving engine efficiency.

DTC P1407 symptoms

Common symptoms associated with DTC P1407 may include:

• Check Engine Light illuminated
• Decreased engine performance
• Rough idling or stalling
• Increased emissions
• Reduced fuel efficiency

DTC P1407 causes

Several factors can lead to the triggering of DTC P1407, including:

• Clogged or restricted EGR metering orifice
• Faulty EGR valve
• Vacuum leaks in the EGR system
• Faulty EGR pressure sensor
• Wiring issues or poor connections in the EGR circuit

DTC P1407 seriousness

DTC P1407 is considered a moderate to serious issue. While it may not cause immediate engine failure, it can lead to increased emissions and reduced engine performance. Ignoring this code can result in further damage to the EGR system and other engine components, potentially leading to costly repairs.

How to diagnose DTC P1407

To diagnose DTC P1407, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1407 code.
2. Inspect the EGR system for visible signs of damage or blockage.
3. Check the EGR valve operation by applying vacuum or using a scan tool.
4. Test the EGR metering orifice for restrictions or clogs.
5. Examine the wiring and connectors for any signs of wear or corrosion.
6. Clear the code and perform a road test to see if the code returns.

How to fix DTC P1407 step-by-step instructions

To fix DTC P1407, follow these steps:

1. Inspect and clean the EGR metering orifice to remove any blockages.
2. Replace the EGR valve if it is found to be faulty.
3. Repair any vacuum leaks in the EGR system.
4. Replace the EGR pressure sensor if it is malfunctioning.
5. Ensure all wiring and connectors are secure and free from damage.
6. Clear the DTC using an OBD-II scanner and perform a test drive to verify the repair.

How to erase DTC P1407

To erase DTC P1407, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.