P1414 – OBD-II DTC

OBD-II DTC P1414 – EGR No Flow Detected

DTC P1414 meaning

DTC P1414 indicates that the Engine Control Module (ECM) has detected a problem with the Exhaust Gas Recirculation (EGR) system. Specifically, it signifies that no flow has been detected in the EGR system when it is expected to be operational. The EGR system is responsible for recirculating a portion of the exhaust gases back into the engine’s intake to reduce nitrogen oxide (NOx) emissions and improve fuel efficiency.

DTC P1414 symptoms

Common symptoms associated with DTC P1414 may include:

• Check Engine Light (CEL) illuminated
• Decreased engine performance
• Increased emissions
• Rough idling or stalling
• Reduced fuel efficiency

DTC P1414 causes

Several factors can lead to the occurrence of DTC P1414, including:

• Faulty EGR valve
• Blocked EGR passages
• Vacuum leaks in the EGR system
• Faulty EGR temperature sensor
• Wiring issues or poor connections in the EGR circuit
• Faulty ECM

DTC P1414 seriousness

DTC P1414 is considered a moderate to serious issue. While it may not cause immediate engine failure, it can lead to increased emissions and reduced engine performance. Ignoring this code can result in further damage to the EGR system or other engine components, as well as potential legal issues due to failing emissions tests.

How to diagnose DTC P1414

To diagnose DTC P1414, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1414 code.
2. Inspect the EGR valve and its connections for any visible damage or disconnections.
3. Check for vacuum leaks in the EGR system.
4. Test the EGR valve operation by applying vacuum or using a scan tool to command it open.
5. Inspect the EGR passages for blockages or carbon buildup.
6. Check the EGR temperature sensor and its wiring for faults.
7. Examine the ECM for any software updates or faults.

How to fix DTC P1414 step-by-step instructions

To fix DTC P1414, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. If the code reappears, inspect and replace the EGR valve if it is faulty.
3. Clean or replace any blocked EGR passages.
4. Repair any vacuum leaks in the EGR system.
5. Test and replace the EGR temperature sensor if necessary.
6. Ensure all wiring and connections in the EGR circuit are secure and free of damage.
7. Recheck the system for proper operation and clear any codes again.

How to erase DTC P1414

To erase DTC P1414, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.