P1416 – OBD-II DTC

OBD-II DTC P1416 – EVR Control Circuit Malfunction

DTC P1416 meaning

DTC P1416 refers to a malfunction in the EVR (EGR Valve Regulator) control circuit. This code indicates that the Engine Control Module (ECM) has detected an issue with the electrical circuit that controls the EGR valve, which is responsible for recirculating exhaust gases back into the engine’s intake to reduce emissions and improve efficiency.

DTC P1416 symptoms

Common symptoms associated with DTC P1416 may include:

• Illuminated check engine light
• Decreased engine performance
• Increased emissions
• Rough idling or stalling
• Failed emissions test

DTC P1416 causes

Several factors can lead to the triggering of DTC P1416, including:

• Faulty EGR valve
• Damaged or corroded wiring in the EVR control circuit
• Defective EVR solenoid
• Faulty ECM
• Vacuum leaks affecting the EGR system

DTC P1416 seriousness

DTC P1416 can be considered serious as it may lead to increased emissions and potential engine performance issues. If left unaddressed, it could result in further damage to the engine or related components, and may cause the vehicle to fail emissions testing.

How to diagnose DTC P1416

To diagnose DTC P1416, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1416 code.
2. Inspect the EGR valve and EVR control circuit for visible damage or corrosion.
3. Check the wiring and connectors for continuity and proper voltage.
4. Test the EGR valve operation using a multimeter.
5. Examine the ECM for any signs of malfunction.

How to fix DTC P1416 step-by-step instructions

To fix DTC P1416, follow these steps:

1. Repair or replace any damaged wiring or connectors in the EVR control circuit.
2. Replace the faulty EGR valve if it is not functioning properly.
3. Replace the EVR solenoid if it is defective.
4. Clear any vacuum leaks in the EGR system.
5. Recheck the system for proper operation and ensure the check engine light is off.

How to erase DTC P1416

To erase DTC P1416, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the “Erase Codes” or “Clear Codes” function on the scanner.
3. Confirm the action to clear the DTC from the ECM.
4. Disconnect the scanner and start the vehicle to ensure the check engine light remains off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.