P1419 – OBD-II DTC

OBD-II DTC P1419 – SAI System Monitor Circuit High Input

DTC P1419 meaning

DTC P1419 refers to a diagnostic trouble code indicating a high input signal from the Secondary Air Injection (SAI) system monitor circuit. This code is typically triggered when the Engine Control Module (ECM) detects an abnormal voltage level in the SAI system, which is responsible for reducing emissions during cold starts by injecting air into the exhaust system.

DTC P1419 symptoms

Common symptoms associated with DTC P1419 may include:

• Illuminated check engine light
• Increased emissions
• Rough engine idle
• Decreased fuel efficiency
• Possible failure during emissions testing

DTC P1419 causes

Several factors can lead to the triggering of DTC P1419, including:

• Faulty SAI pump
• Wiring issues or short circuits in the SAI circuit
• Defective SAI relay
• Faulty ECM or software issues
• Blocked or restricted air passages

DTC P1419 seriousness

The seriousness of DTC P1419 can vary. While it may not cause immediate drivability issues, it can lead to:

• Increased emissions, which can affect environmental compliance
• Potential damage to the engine or exhaust components if left unaddressed
• Failure to pass emissions testing, resulting in legal or financial penalties

How to diagnose DTC P1419

To diagnose DTC P1419, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1419 code.
2. Inspect the SAI system components, including the pump, relay, and associated wiring.
3. Check for any additional trouble codes that may provide more context.
4. Test the voltage and ground signals at the SAI pump and relay.
5. Perform a visual inspection for any signs of damage or corrosion.
6. Consult the vehicle’s service manual for specific testing procedures related to the SAI system.

How to fix DTC P1419 step-by-step instructions

To fix DTC P1419, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors in the SAI circuit.
3. Replace the SAI pump if it is found to be faulty.
4. Test and replace the SAI relay if necessary.
5. Ensure that all air passages are clear and unobstructed.
6. Recheck the system for proper operation and monitor for any reoccurrence of the code.

How to erase DTC P1419

To erase DTC P1419, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.