P1427 – OBD-II DTC

OBD-II DTC P1427 – EGI Temperature Sensor Failure

DTC P1427 meaning

DTC P1427 refers to a diagnostic trouble code indicating a failure in the Engine Gasoline Injection (EGI) temperature sensor. This sensor is responsible for monitoring the temperature of the engine’s fuel system, providing critical data to the engine control unit (ECU) for optimal fuel management and performance. When the ECU detects a malfunction or an out-of-range reading from the EGI temperature sensor, it triggers this code.

DTC P1427 symptoms

Common symptoms associated with DTC P1427 may include:

• Check Engine Light illuminated
• Decreased fuel efficiency
• Rough engine idle
• Engine stalling or misfiring
• Difficulty starting the engine

DTC P1427 causes

Several factors can lead to the triggering of DTC P1427, including:

• Faulty EGI temperature sensor
• Wiring issues, such as shorts or open circuits
• Corroded or loose electrical connectors
• Faulty ECU or software issues
• Contaminated fuel or fuel system problems

DTC P1427 seriousness

The seriousness of DTC P1427 can vary. While it may not cause immediate catastrophic failure, it can lead to:

• Increased emissions
• Poor engine performance
• Long-term engine damage if left unaddressed

It is advisable to diagnose and repair the issue promptly to maintain vehicle performance and compliance with emissions regulations.

How to diagnose DTC P1427

To diagnose DTC P1427, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1427 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the EGI temperature sensor and its wiring for visible damage or corrosion.
4. Test the EGI temperature sensor using a multimeter to ensure it is functioning within specifications.
5. Examine the ECU for any software updates or faults.

How to fix DTC P1427 step-by-step instructions

To fix DTC P1427, follow these steps:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to the EGI temperature sensor.
3. If the EGI temperature sensor is faulty, replace it with a new one.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Start the engine and monitor for any reoccurrence of the P1427 code.

How to erase DTC P1427

To erase DTC P1427, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.