DTClookup.com

Search DTC

P1444 – OBD-II DTC

OBD-II DTC P1444 – Purge Valve Stuck Open

DTC P1444 meaning

DTC P1444 refers to a diagnostic trouble code indicating that the purge valve in the evaporative emission control system is stuck open. The purge valve is responsible for controlling the flow of fuel vapors from the charcoal canister to the engine for combustion. When this valve is stuck open, it can lead to improper fuel vapor management and affect engine performance and emissions.

DTC P1444 symptoms

Common symptoms associated with DTC P1444 may include:

  • Check Engine Light illuminated
  • Decreased fuel efficiency
  • Rough idling or stalling
  • Increased emissions
  • Difficulty starting the engine

DTC P1444 causes

Several factors can lead to the occurrence of DTC P1444, including:

  • Faulty purge valve
  • Wiring issues or poor connections in the purge valve circuit
  • Vacuum leaks in the evaporative emission system
  • Faulty engine control module (ECM)
  • Clogged or damaged charcoal canister

DTC P1444 seriousness

DTC P1444 is considered a moderate issue. While it may not cause immediate engine failure, it can lead to increased emissions and reduced fuel efficiency. Ignoring this code can result in more significant problems over time, including potential damage to the engine or exhaust system.

How to diagnose DTC P1444

To diagnose DTC P1444, follow these steps:

  • Use an OBD-II scanner to confirm the presence of the P1444 code.
  • Inspect the purge valve for physical damage or blockage.
  • Check the wiring and connectors for signs of wear or corrosion.
  • Test the purge valve operation by applying voltage to see if it opens and closes properly.
  • Inspect the evaporative emission system for vacuum leaks.
  • Check for additional trouble codes that may indicate related issues.

How to fix DTC P1444 step-by-step instructions

To fix DTC P1444, follow these step-by-step instructions:

  1. Clear the DTC using an OBD-II scanner.
  2. Perform a visual inspection of the purge valve and its connections.
  3. If the purge valve is faulty, replace it with a new one.
  4. Repair any damaged wiring or connectors found during inspection.
  5. Check and repair any vacuum leaks in the evaporative emission system.
  6. Recheck the system for proper operation and ensure no additional codes are present.
  7. Test drive the vehicle to confirm that the issue is resolved.

How to erase DTC P1444

To erase DTC P1444, follow these steps:

  • Connect an OBD-II scanner to the vehicle’s diagnostic port.
  • Turn on the ignition without starting the engine.
  • Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
  • Confirm the action to clear the trouble codes.
  • Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

← All OBD-II Diagnostic Trouble Codes

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.