P1454 – OBD-II DTC

OBD-II DTC P1454 – Evaporative Check Solenoid Circuit Malfunction

DTC P1454 meaning

DTC P1454 refers to a malfunction in the evaporative check solenoid circuit. This code indicates that the Engine Control Module (ECM) has detected an issue with the solenoid responsible for controlling the flow of fuel vapors from the fuel tank to the engine for combustion. The evaporative emissions system is crucial for reducing harmful emissions and ensuring the vehicle complies with environmental regulations.

DTC P1454 symptoms

Common symptoms associated with DTC P1454 may include:

• Check Engine Light illuminated
• Decreased fuel efficiency
• Rough idling or stalling
• Fuel odor due to vapor leaks
• Failed emissions test

DTC P1454 causes

Several factors can lead to the triggering of DTC P1454, including:

• Faulty evaporative check solenoid
• Wiring issues or damaged connectors in the solenoid circuit
• Vacuum leaks in the evaporative system
• Faulty fuel tank pressure sensor
• Defective ECM or software issues

DTC P1454 seriousness

DTC P1454 is considered a moderate issue. While it may not cause immediate drivability problems, it can lead to increased emissions and potential failure during emissions testing. Ignoring this code can result in further damage to the evaporative system and may affect overall vehicle performance.

How to diagnose DTC P1454

To diagnose DTC P1454, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1454 code.
2. Inspect the evaporative check solenoid and its wiring for any visible damage or disconnections.
3. Test the solenoid for proper operation using a multimeter.
4. Check for vacuum leaks in the evaporative system.
5. Examine the fuel tank pressure sensor for faults.
6. Review the ECM for any software updates or issues.

How to fix DTC P1454 step-by-step instructions

To fix DTC P1454, follow these steps:

1. Repair or replace any damaged wiring or connectors in the solenoid circuit.
2. Replace the faulty evaporative check solenoid if it fails the testing.
3. Seal any vacuum leaks found in the evaporative system.
4. Replace the fuel tank pressure sensor if it is determined to be defective.
5. Reprogram or replace the ECM if necessary.
6. Clear the DTC using an OBD-II scanner and perform a test drive to ensure the issue is resolved.

How to erase DTC P1454

To erase DTC P1454, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to verify that the Check Engine Light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.