P1455 – OBD-II DTC

OBD-II DTC P1455 – Unable To Bleed Up Fuel Tank Vacuum

DTC P1455 meaning

DTC P1455 indicates that the vehicle’s onboard diagnostic system has detected an issue with the fuel tank vacuum system. Specifically, it means that the system is unable to bleed up the fuel tank vacuum, which can affect the vehicle’s emissions control and fuel efficiency. This code is often related to the evaporative emission control system (EVAP) and may indicate a problem with the components responsible for maintaining proper pressure in the fuel tank.

DTC P1455 symptoms

Common symptoms associated with DTC P1455 may include:

• Check Engine Light illuminated
• Difficulty filling the fuel tank
• Fuel odor around the vehicle
• Decreased fuel efficiency
• Possible rough idling or stalling

DTC P1455 causes

Several factors can lead to the triggering of DTC P1455, including:

• Faulty or damaged EVAP canister
• Clogged or damaged fuel tank vent lines
• Defective fuel tank pressure sensor
• Loose or damaged gas cap
• Vacuum leaks in the EVAP system

DTC P1455 seriousness

DTC P1455 is considered a moderate issue. While it may not cause immediate drivability problems, it can lead to increased emissions and reduced fuel efficiency. Ignoring this code may result in further damage to the EVAP system or other related components, potentially leading to more costly repairs in the future.

How to diagnose DTC P1455

To diagnose DTC P1455, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1455 code.
2. Inspect the gas cap for proper sealing and any signs of damage.
3. Check for any visible damage or blockages in the EVAP system components.
4. Test the fuel tank pressure sensor for proper operation.
5. Perform a smoke test to identify any vacuum leaks in the EVAP system.

How to fix DTC P1455 step-by-step instructions

To fix DTC P1455, follow these steps:

1. Inspect and replace the gas cap if it is damaged or does not seal properly.
2. Repair or replace any damaged or clogged vent lines in the EVAP system.
3. Replace the faulty fuel tank pressure sensor if it is not functioning correctly.
4. Address any vacuum leaks found during the smoke test.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P1455

To erase DTC P1455, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the vehicle to check if the code returns.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.