P1457 – OBD-II DTC

OBD-II DTC P1457 – Unable To Bleed – Up Vacuum in Tank

DTC P1457 meaning

DTC P1457 refers to a diagnostic trouble code indicating that the vehicle’s onboard diagnostic system has detected an issue with the evaporative emission control system. Specifically, it signifies that the system is unable to bleed or create a vacuum in the fuel tank. This can lead to improper fuel vapor management and may affect the vehicle’s emissions performance.

DTC P1457 symptoms

Common symptoms associated with DTC P1457 may include:

• Check Engine Light illuminated
• Decreased fuel efficiency
• Fuel odor, especially near the fuel tank
• Difficulty filling the fuel tank
• Rough idling or stalling

DTC P1457 causes

Several factors can contribute to the occurrence of DTC P1457, including:

• Faulty or damaged EVAP canister
• Clogged or damaged EVAP lines
• Defective fuel tank pressure sensor
• Faulty purge valve or vent valve
• Loose or damaged gas cap

DTC P1457 seriousness

DTC P1457 is considered a moderate issue. While it may not cause immediate drivability problems, it can lead to increased emissions and potential failure during emissions testing. Addressing this code promptly is important to maintain vehicle performance and compliance with environmental regulations.

How to diagnose DTC P1457

To diagnose DTC P1457, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1457 code.
2. Inspect the gas cap for damage or looseness.
3. Check the EVAP system components for visible damage or leaks.
4. Test the fuel tank pressure sensor for proper operation.
5. Examine the EVAP lines for clogs or breaks.
6. Perform a smoke test to identify leaks in the EVAP system.

How to fix DTC P1457 step-by-step instructions

To fix DTC P1457, follow these step-by-step instructions:

1. Inspect and replace the gas cap if it is damaged or not sealing properly.
2. Repair or replace any damaged EVAP lines or hoses.
3. Replace the faulty fuel tank pressure sensor if it is not functioning correctly.
4. Test and replace the purge valve or vent valve if they are defective.
5. Clear any blockages in the EVAP system using a smoke test.
6. After repairs, use an OBD-II scanner to clear the code and perform a drive cycle to ensure the issue is resolved.

How to erase DTC P1457

To erase DTC P1457, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to check if the code returns.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.