P1462 – OBD-II DTC

OBD-II DTC P1462 – Evap Emission Control Sys Leak Detected (Gross Leak/No Flow)

DTC P1462 meaning

DTC P1462 refers to a diagnostic trouble code indicating that the Evaporative Emission Control System has detected a gross leak or no flow. This system is responsible for capturing and storing fuel vapors from the fuel tank to prevent them from escaping into the atmosphere. A gross leak suggests a significant issue, such as a large crack or a disconnected hose, which can lead to increased emissions and potential environmental harm.

DTC P1462 symptoms

Common symptoms associated with DTC P1462 may include:

• Check Engine Light illuminated
• Decreased fuel efficiency
• Strong fuel odor
• Failed emissions test

DTC P1462 causes

Several factors can trigger DTC P1462, including:

• Loose or damaged gas cap
• Cracked or broken EVAP hoses
• Faulty EVAP canister
• Defective purge valve
• Fuel tank leaks

DTC P1462 seriousness

DTC P1462 is considered a serious issue as it indicates a significant leak in the EVAP system. This can lead to increased emissions, which may not only harm the environment but also result in failing emissions tests. Additionally, unresolved issues can lead to further damage to the vehicle’s emission control system.

How to diagnose DTC P1462

To diagnose DTC P1462, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the gas cap for proper sealing and condition.
3. Visually check all EVAP hoses for cracks or disconnections.
4. Test the EVAP canister for blockages or damage.
5. Check the purge valve operation to ensure it opens and closes correctly.
6. Perform a smoke test to identify any leaks in the system.

How to fix DTC P1462 step-by-step instructions

To fix DTC P1462, follow these steps:

1. Ensure the gas cap is tightened properly or replace it if damaged.
2. Inspect and replace any cracked or damaged EVAP hoses.
3. Replace the EVAP canister if it is found to be faulty.
4. Test and replace the purge valve if it is not functioning correctly.
5. Repair any leaks found during the smoke test.
6. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P1462

To erase DTC P1462, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.