P1463 – OBD-II DTC

OBD-II DTC P1463 – Fuel Tank Temperature Sensor Circuit Malfunction

DTC P1463 meaning

DTC P1463 refers to a malfunction in the fuel tank temperature sensor circuit. This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected an issue with the signal from the fuel tank temperature sensor, which is responsible for monitoring the temperature of the fuel in the tank. The ECM uses this information to optimize fuel delivery and emissions control. A malfunction in this circuit can lead to incorrect readings, affecting engine performance and efficiency.

DTC P1463 symptoms

Common symptoms associated with DTC P1463 may include:

• Check Engine Light illuminated
• Increased fuel consumption
• Engine performance issues, such as rough idling or stalling
• Difficulty starting the engine
• Unusual fuel gauge readings

DTC P1463 causes

Several factors can lead to the occurrence of DTC P1463, including:

• Faulty fuel tank temperature sensor
• Wiring issues, such as shorts or open circuits in the sensor circuit
• Corroded or loose electrical connectors
• Faulty Engine Control Module (ECM)
• Issues with the fuel tank itself, such as damage or contamination

DTC P1463 seriousness

The seriousness of DTC P1463 can vary depending on the underlying cause. While it may not immediately affect vehicle safety, it can lead to:

• Increased emissions due to improper fuel management
• Reduced fuel efficiency, leading to higher operating costs
• Potential engine performance issues that could worsen over time

It is advisable to address this code promptly to prevent further complications.

How to diagnose DTC P1463

To diagnose DTC P1463, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1463 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the fuel tank temperature sensor and its wiring for visible damage or corrosion.
4. Test the fuel tank temperature sensor using a multimeter to ensure it is functioning within specifications.
5. Examine the electrical connectors for secure connections and signs of wear.
6. Check the ECM for any software updates or faults.

How to fix DTC P1463 step-by-step instructions

To fix DTC P1463, follow these step-by-step instructions:

1. Clear the trouble code using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the fuel tank temperature sensor.
3. If the sensor is faulty, replace it with a new one.
4. Ensure all connections are secure and free from corrosion.
5. Recheck the system by starting the engine and monitoring for any new codes.
6. Perform a test drive to ensure the issue is resolved and the Check Engine Light does not reappear.

How to erase DTC P1463

To erase DTC P1463, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the trouble codes menu on the scanner.
4. Select the option to clear or erase codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the engine to verify that the Check Engine Light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.