P1464 – OBD-II DTC

OBD-II DTC P1464 – Unable To Pull Vacuum In Tank

DTC P1464 meaning

DTC P1464 refers to a diagnostic trouble code indicating that the vehicle’s onboard diagnostic system has detected an issue with the fuel tank vacuum system. Specifically, it means that the system is unable to pull a vacuum in the fuel tank, which is essential for proper fuel system operation and emissions control. This code is often associated with the evaporative emissions control system (EVAP) and can affect the vehicle’s performance and emissions levels.

DTC P1464 symptoms

Common symptoms associated with DTC P1464 may include:

• Check Engine Light illuminated
• Decreased fuel efficiency
• Difficulty starting the engine
• Fuel odor around the vehicle
• Possible rough idling or stalling

DTC P1464 causes

Several factors can lead to the triggering of DTC P1464, including:

• Faulty or damaged EVAP canister
• Clogged or damaged vacuum lines
• Faulty fuel tank pressure sensor
• Loose or damaged gas cap
• Issues with the purge valve or vent valve

DTC P1464 seriousness

The seriousness of DTC P1464 can vary, but it is generally considered a moderate issue. While it may not cause immediate engine failure, it can lead to:

• Increased emissions, which can affect environmental compliance
• Potential damage to the fuel system if left unaddressed
• Reduced fuel efficiency, leading to higher operating costs

How to diagnose DTC P1464

To diagnose DTC P1464, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1464 code.
2. Inspect the gas cap for proper sealing and any signs of damage.
3. Check for any visible damage to vacuum lines and connections.
4. Test the fuel tank pressure sensor for proper operation.
5. Examine the EVAP canister and associated components for blockages or damage.
6. Perform a smoke test to identify any leaks in the EVAP system.

How to fix DTC P1464 step-by-step instructions

To fix DTC P1464, follow these steps:

1. Ensure the gas cap is tightened properly or replace it if damaged.
2. Repair or replace any damaged vacuum lines or connections.
3. Replace the faulty fuel tank pressure sensor if necessary.
4. Inspect and replace the EVAP canister if it is clogged or damaged.
5. Replace or repair the purge valve and vent valve as needed.
6. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P1464

To erase DTC P1464, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.